Whats needed for sas

[Ravins]

I want to do SAS on my 94 eddie. I would like to run coils up front instead of springs. So what do I need to git-er-done? Thanks Ravins

 

[RockRanger]

Money and lots of it to do it right.

 

[IZwack]

Thread moved to Offroad Explorer Projects -- the "SAS Registry" is for finished SAS projects.

Ravins >> please browse and read through the other SAS builds as they will have the most details about SAS's.

 

[mechanix]

I would suggest getting a donor vehicle for one. This way you can see how it all goes together and you get all the parts. Just look for one that is not all hacked up. I bought a 79 f-150 for my swap for $100, it was complete and stock. Also time and money will be a key factor if you are patient enough you can find some good deals along the way. I keep an eye out on a few diffrent forums for some good parts that are half the cost. Ebay is another good spot to find parts. But like Iz suggested read over the other thread of the SAS's that have been done. There are some good ones.

Eric

 

[gluvsave35]

research and lots of it!!!

 

[redranger4.0]

im 2 years into my build and 3 years into researching and im still learning new stuff, so make sure you do alot of reading.