Will the Eng be out of balance?

[myworldwasok]

Dang, I just tightened the bolts to the tranny after replacing the front seal and I noticed that my torque converter is off 90 degrees.

What do you think am I going to have a vibration problem? I called a friend who said he doubts that I'll have a problem. I havent hooked up any thing else yet and the jack is still under the tranny, BUT those bolts were a son of a *!!* to tighten up?
HELP 6/3/08 2:00 pm
THANKS

 

[myworldwasok]

Well no replies so I'm off to get it done.
thanks

 

[IZwack]

You probably wont notice any difference.

 

[ed robinson]

normaly if the convertor needs to be in one spot. it will only bolt up one way.

 

[myworldwasok]

IZwack and ed robinson First thanks for the reply...
A as to only going in one way 4 bolt pattern, 90 degrees each time, 4 possibilities ? IZwack I didn't want to take the chance of the posible vibration taking out the seal and turning into the leak I was trying to fix. I'm not a real mechanic I just pretend. I was pretty sure I was opening my self up to a vibration so I took care of it But, IZwac with your confidance at the time I could have been talked out of it
Hey thanks folks