Windshield wiper question

[patrick82]

So i have a question regarding my wiper motor:

when i hit the arm to spay water on the windshield NOTHING HAPPENS, however i have replaced the arm on my steering wheel column.

- also when i run a wire from the motor - to a switch inside the vechicle i get power, therefore this tells me the motor is still good...

i was wondering if any of you had an idea..

i was thinking it could be the "relay" and since they are one of the cheaper fixes on partsgeek i was going to buy one and replace it and see what happens..

i would still like to hear you guys and girls expertise

or could it be:
windshield wiper switch connector
windshield wiper motor connector

 

[RickOTR]

Do you hear it try to move at all. If it does, you may need to change the wiper arm position on the cam until it works correctly. That's what I had to do to on my 97. If nothing works then first try fuse, relay, switch, then wiring in that sequence.