Would anyone be willing to make me the required brackets for the 3" PA body lift?

[MO_GUY]

Would anyone be willing to make me the required brackets for the 3" PA body lift? I have no idea how to do it and I don't know anyone that will do anything like this for cheap.

 

[jimbo74]

well then, just buy the bumper brackets for another vehicle

 

[section525]

I might be making some for mine here pretty soon (again). Your 2k is probably the same as my '99. I'll be cutting them out on a plasma cutter so making extras wont be a problem. I'll let you know...

 

[MO_GUY]

thanks a lot......im not even really sure how to go about installing the kit but i guess i could figure it out.....best way would be if someone had pics of how they did it....i keep reading that people use 2x4's anyone got pics of this?

 

[section525]

Here is one:


Okay.. so thats a little extreme.

All you do it put the 2x4s or 4x4s on the jack plate and jack it up between the frame and under the door jam. You'll see a pretty flat spot to lift against.

 

[MO_GUY]

that pic might be convincing if there was a chassis under it

 

[MO_GUY]

do these things come with good directions? possibly with pictures?

 

[section525]

The directions are okay considering they're talking about a completely different truck! The best thing to do is study your ass off on here. The whole concept is pretty easy if you think about it. You're unbolting 10 bolts, raising a body a few inches, putting blocks under it, lowering it, rebolting. How hard could it be?! Just make sure you unbolt your radiator before you jack the body up.