Brem95
Elite Explorer
- Joined
- September 7, 2019
- Messages
- 187
- Reaction score
- 38
- Location
- Canada
- City, State
- Alberta
- Year, Model & Trim Level
- 97' Explorer Sport OHV
Hey guys, got off work early today so I dumped my coolant, swapped out the t stat flushed cooling system, added coolant then burped the system.
my issue is still here, the gauge shows approx 1/3 temp when warmed up (sometimes slightly higher) as of right now. I was hoping thermostat would fix this but it hasn’t. Should I be concerned and change the sensor or is this fairly normal? Like I said sometimes it’s a bit closer to half but I want to ensure it’s accurate and I don’t overheat the engine
thanks and sorry for the long winded question.
forgot to mention I put the Tstat in the same way and the little breather hole upwards.
my issue is still here, the gauge shows approx 1/3 temp when warmed up (sometimes slightly higher) as of right now. I was hoping thermostat would fix this but it hasn’t. Should I be concerned and change the sensor or is this fairly normal? Like I said sometimes it’s a bit closer to half but I want to ensure it’s accurate and I don’t overheat the engine
thanks and sorry for the long winded question.
forgot to mention I put the Tstat in the same way and the little breather hole upwards.