Search results

i dont plan on fixing it. i just wanted to make sure the engine wasnt damaged so i wanted to here it run. If i dont just swap the parts into another explorer like i planned, then i will tube the front end and turn it into a toy i guess. my local junk yard has been closed the past 2 days so i...

Ok ill try that. The edis module is dedinately damaged. Its warped pretty bad. Ill pick one up tomorrow.

yes i cut the front end off with a recip saw. guess ill have to do the same at a junkyard and weld it on? idk im pretty upset i love my explorer

i was trying to start it in this picture so i rigged it up what is this? what is this?

Just in case reseting it didnt work and it was easy enough to just jumper the connector. Since that didnt help ill just put it back the way it was. Is there a Ignition box like the older style fords have?

My 92 sploder got sploded this morning on the way to work. Tboned someone. I got everything hooked up right I think but it won't start. I bypassed the inertia switch already and I'm getting fuel. Maybe no spark? Anything you guys can think of? Ill post pics in a bit. Im going to the junk yard...

Pierce Brand Fuel pump was only $70 with warranty. works great

No do not drop your tank. Read my write up on doing it from the top: http://www.explorerforum.com/forums/showthread.php?t=367012

http://www.ebay.com/itm/New-Inside-Interior-Front-Drivers-Gray-Door-Pull-Handle-91-94-Ford-Explorer-SUV-/330666692549?pt=Motors_Car_Truck_Parts_Accessories&hash=item4cfd454fc5&vxp=mtr

On ebay they are $18. You have to use a grinder or something to cut the old tabs off. The new handle comes with clips to install. Took me $20 minutes super easy

here is how i did it http://www.explorerforum.com/forums/showthread.php?t=367012

you can get a fuel pressure testing kit for about $20 at harbor freight. if you need a new pump, here is a thread i posted pics on how to replace it the easiest way. http://www.explorerforum.com/forums/showthread.php?t=367012

<a href="http://s536.photobucket.com/albums/ff327/gageissocool/1992%20ford%20explorer/?action=view&amp;current=20120905_180841.jpg" target="_blank"><img src="http://i536.photobucket.com/albums/ff327/gageissocool/1992%20ford%20explorer/20120905_180841.jpg" border="0" alt="Photobucket"></a>

Actually if your catalytic converter is bad (rattling) you COULD have way too much back pressure causing some EGR problems. I would definately change out that cat. its a good thing to do anyway on these old trucks. This is the Cat you need, The BEST performance and the CHEAPEST on the market...

Alrighty. Got the pump in the mail this morning and put it in after work. One of the easiest fuel pumps that I have done. Cut an access hole under the drivers side rear seat and removed the pump. Luckily my fuel line connectors came off pretty easy with the fuel line tool. Gave the fittings a...

Just checked the tracking number and the fuel pump will be here on the 6th. I'm going to cut a hole in the floor instead of dropping the tank because I don't want to mess with rusted bolts underneath. I'll keep you updated!

I have been having the same problem intermittently but then it slowly got worse and worse. New fuel filter did nothing. My new Fuel pump will be here in a couple of days and ill let you know if it fixes the problem. My fuel gauge has been non functional since ive had my explorer so i purchased...

Just for other people reaserching the same topix, easiest and cheapest way to go: http://www.ebay.com/itm/RED-UNIVERSAL-JDM-750ML-ROUND-BILLET-ALUMINUM-OIL-RESERVOIR-CATCH-TANK-CAN-KIT-/180723600702?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a13f74d3e&vxp=mtr Ive used several of these on...

ok. any idea how much bigger the alt. pulley should be? i might check around some ford mustang forums and see if i can get a used one underdrive pulley....

Where could i get corresponding pullies? i use my AC alot...

ill pm you

JEGS FAN CONTROLLER http://www.jegs.com/i/Derale/259/16759/10002/-1

the hhr fan wont fit a foctory radiator though right? if the taurus one will work, i found one for about $50 on ebay or i could hit up my local junk yard and get it for $15 probably. too cheap to work? doesnt say anything about being single or dual speed...

ok i think i found the one you were talking about.http://www.ebay.com/itm/FORD-TAURUS-3-8L-1988-89-90-91-92-93-94-95-RADIATOR-A-C-AC-FAN-NEW-/221011440480?pt=Motors_Car_Truck_Parts_Accessories&hash=item33754ef360&vxp=mtr as far as getting a fan controller, i dont really want to spend $150 on...

and this for the fan? http://www.ebay.com/itm/Cooling-fan-Lincoln-Mark-8-VIII-electric-Ford-Mustang-GT-Cobra-Thunderbird-/280885722270?pt=Motors_Car_Truck_Parts_Accessories&hash=item416617fc9e&vxp=mtr