v8 5.0l

I posted a summery of my problem a few days ago but didn't get any useful answers. My 2000 Ford Explorer 5.0 V8 2WD is having transmission problems. Its stuck in limp mode, won't engae in reverse or neutral, and it threw these 3 codes; P1747, P1636, and P0750. However, I just noticed that there...

Alrighty, here's the lay down. I just replaced the front wheel bearings, but still nothing different about the squeaking. I suppose I should have been smarter about it, since it has just come to my attention that the noise is not supposed to happen when going over speed bumps too. Mechanic...

Hello! So I thought I would check really quickly with you guys on opinions with what's going on. My transmission has been shifting really rough lately. When accelerating it's mostly fine, it's rough as in you can feel it noticeably in the car. After a heavy acceleration and letting off the gas...

Heyo! I own a 1996 Ford Explorer Eddie Bauer, with the 5l v8 engine. I just replaced my front brake pads (I can actually slow down at a reasonable speed now) and brought the car to a mechanic to perform a checkup on the entire vehicle. News ain't good, but for a 201k mile vehicle, I didn't...

Hello! So I've had a longstanding engine warning light stuck on my dash for awhile that will, every so now and then, turn off for a little bit but eventually turn back on again. One of my friends has a spare ODBII reader so I borrowed that from him to check it out. I believe it read P0401...

So I have a 99 explorer 5.0 limited. I want the exhaust to be louder and better but I want to be able to quiet it down when I want. So I was thinking dual exhaust cutouts. First off what is the diameter of my exhaust??? And I was thinking of the best placement.... I want it after the cats. But...

I can't locate the DPFE that seems to be causing a P1401 code. All pictures I found don't match with my engine. Thanks in advance.