Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Ford Explorer Community - Maintenance - Modifications - Performance Upgrades - Problem Solving - Off-Road - Street
Explorer Forum Covers the Explorer ST, Explorer Sport, Explorer Sport Trac, Lincoln Aviator, Mercury Mountaineer, Mazda Navajo, Ford Ranger, Mazda Pickups, and the Ford Aerostar
Hello all. Looking to find out where this vacuum hose goes to. It comes from the bottom of the evap canister purge shown below:
I am not sure where this goes to. The manual says it goes to the intake, but i could not find anywhere where it looks to plug into. Any help is appreciated. Thanks
It goes to the front of the intake manifold plenum. Where all the vacuum lines meet. It's in between the throttle body and idle air control valve.
Looks broken so I'm sure your driving with a vacuum leak. Either you replace that piece that comes with all the vac lines or Ive seen people pull out the specific line from where they all meet and put a plastic barb in place of the broken line with a new vac lines.
Not to hijack a thread but it's a similar topic. The hose that goes from the purge valve to the cannisters, after the metal tube there is another rubber hose, mine is disintegrating and need to change it. The pic shows the hose that I guess I'm putting one cut to size. The metal tube goes to the purge valve and the other side goes to the first vapor cannisters.
Does anyone know of any other hoses involved with the cannisters towards the back that does the same thing?
