need pics of custom front bumpers for first gen

[bipolarbob]

Looking to make a bumper for my 91 with a 3" body lift.Anyone got any pics?thinking of a tube bumper with bushguard.Looking for ideas.

 

[NOTAJP]

Here's the James Duff pre-runner winch mount for the 1st Gens.

 

[CarFreak146]

nice bumper...... AND hood!!!

 

[NOTAJP]

Thanks, I wish the pic was better quality so you could really see it.

 

[Josh S.]

Here's mine. You can't tell in the pic, but it needs a new paint job

 

[NOTAJP]

That's nice Josh.

 

[Josh S.]

Thanks bro! Our explorers kinda look like each other. I dig that hood. Where'd you get that? Dragster style or sumthin. Bumper is sweet too.

 

[NOTAJP]

Hood The price was great and the quality is very good too. That's funny our Xs do look alike. I almost went that route with my front suspension before I decided on the SAS.

 

[Webster3]

Originally posted by NOTAJP
Here's the James Duff pre-runner winch mount for the 1st Gens.

I couldn't find this style of bumper on James Duff's site... is this new?

Ed

 

[NOTAJP]

I've had this bumper since spring. They do not show this particular bumper on their webesite or the catalog. For some reason they STILL don't update anything. I ordered the pre-runner winch bumper and this is what I got. We went rounds about this issue before I finally decided to just keep it. I really wanted the 'true pre-runner look' winch bumper but it is no longer available.

 

[Webster3]

It's not bad looking, but a little more "pre-runner-ish" would have been nice. This one looks mean... which is cool too.

Ed

 

[NOTAJP]

I may end up cutting up this one and moving the winch back towards the frame and welding it up to look more like a pre-runner style bumper. Or just start from scratch as soon as I get a tube bender but that won't be until I paint this thing.

 

[RockRanger]

do a search for brian1 he has a very nice bumper he built. One of the nicest I have seen.

Matt

 

[Maniak]

Not a fancy bumper.. but here is the bumper we made...

the lower tube goes between the frame rails only.. This helped the approach angle..

Yes I've used my highlift jack as a bumper for the bumper.. I hope to have the rear bumper done soon so I can finally get my highlift off the front.

~Mark

 

[Brian1]

Originally posted by RockRanger
do a search for brian1 he has a very nice bumper he built. One of the nicest I have seen.

Matt

Thanks Matt

Yeah, I told bipolarbob I was going to email him some pics of mine but I havent got around to it.

Edit:
Okay, I got some more pics for you, they are in my post in this forum. Here is one of the new pics I took:

 

[MuddyHarris#8]

Josh S. where did you get/how did you build that front bumper and skid plate..its really cool and exactly what i've had in mind. If you could let me know where you bought this or the basics of how you built it i'd really appreciate it.

 

[AlaskanJack]

Here is a bumper I bought from Kirby

 

[AlaskanJack]

MSN Sucks!!!!

 

[Josh S.]

Originally posted by MuddyHarris#8
Josh S. where did you get/how did you build that front bumper and skid plate..its really cool and exactly what i've had in mind. If you could let me know where you bought this or the basics of how you built it i'd really appreciate it.

I had a buddy from the board build the bumper for me at his house, then I went down to the metal shop with a cardboard cutout for the skidplate, and they cut it out of .125 aluminum. The bumper was made out of .120 wall 1.5" ERW tubing. A JD2 tubing bender was used, and a Lincoln Weldpac 100 flux-cored welder. I am in the proccess of reinforcing a couple spots on the bumper right now, so I can jack the truck off it without it flexing. I finished one side, but still have to do the other. I am putting in a tube on each side that goes to the frame and to the end of the tubes that wrap around.

Its basically one tube wrapping around the front of the truck. There is a bar going between the framerails in the front, with two little downtubes going down, supporting the main bar. There is also a crossbar underneath, that two more downtubes go to, to support the skidplate. The skidplate is bolted onto 4 tabs. If you need more pics or whatever, lemme know. Hope this helped.

 

[MuddyHarris#8]

Josh S. thanks that is helpful but if you could post some more pictures or email them to me at James62186@hotmail.com that would be great, I'd like to see what it looks like from underneath and the side, I think i understand whats happening underneath but i'm not sure, so if you could help me out that'd be great. Thanks a lot, its a really nice lookin set up you have. How much did that run you for the parts?