Search results

i've got a '94 explorer and if you can believe this the head unit doesn't even have a tape deck, just radio! I think I'll play it cheap and just upgrade it from another factory head unit, so I'm curious what years are compatible with mine? I found a head unit and amp from a '96 contour for...

This has been happening for a month or so and it's pretty random so I've been just ignoring it, but I can't anymore. When you turn the key, the ignition just clicks. The lights don't die, signifying a loose cable on the battery or starter, the battery is brand new, and the starter solenoid...

About a month ago there started an audible clicking sound I could hear with the windows rolled down that basically sounds like a rock is caught in the tread. It becomes much more audible when I turn left. The right side may make the noise, but it's harder to hear from the driver's side. While...

I've checked continuity on the middle harness and all of the wires are fine. When you hook the trailer harness straight to a battery, the lights all work properly.

There's 3 pieces to this. The connector on the truck says it's gets the proper voltage. When I plug in the middle piece, there's no voltage coming from any of the wires. So what I did was bypass the middle harness, and ran a wire from the ball hitch (I know it is a ground, it worked for...

OK, I have done this and the voltmeter shows power is getting to the connector on the truck. But it's just like you said, when I plug the harness in the voltmeter doesn't show any voltage getting to any of the wires. Any idea where this short would be? Ps. There is continuity with the 2'...

Thanks for the pic, I'll double check the wiring, but even if some of the wiring was backwards, wouldn't some of the lights still work or come on at all? I mean nothing works period and I have tried running wires to different locations without any luck.

I'm totally stumped. The relay clicks when you plug the harness in, but none of the lights come on.

I've actually gone further than that. I ran a ground wire from the trailer harness to the truck, and bypassed the harness that snaps into the wiring under the truck and ran a wire from the power lead from the truck to the power wire on the trailer harness and all that happens is the relay by...

I picked up a used trailer today and it has a 4 wire harness setup. I've verified all of the lights work properly by hotwiring the trailer harness to a battery. My '94 Explorer came with the tow package so it has the factory trailer harness. I've used it before with a Uhaul trailer and it worked...

Where'd you get your rear bumper from? Thanks, PJ

I'd recommend painting or replacing the bumpers to black, as well as the grill. I think it'd make it look even better.

http://www.4wheelparts.com/product_info.asp?sku=TEC51-58 Are these the correct rockcrawlers for my truck? I didn't see anywhere about the bolt pattern so I'm not sure.

any idea what the metric conversion of a 31x10.5x15 is?

Ah, ok. I see that now. Thanks.

ok, on a completely different note, since I don't really plan on offroading this truck since it have a fair amount of miles and I want it to last. Would these fit on my Explorer? It's the same bolt pattern but I've read some problems with the 4wd...

Thanks Robb, that helps a lot :D

would these fit? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6763&item=2456872724

Hi guys. I have a '94 Explorer Sport 4wd. I'd like to upgrade the wheels and tires. I would like to run a black wheel, something like this: But I don't really know about tires. Something like a BFG all terrain, but those are really expensive. I want a nice tread to make it through...