Search results

well i just went out with a mehcanics mirror and checked the lower intake for leaks. i did not see any but i was also wasint able to check behind the oil pressure sending unit. I also noticed the leak from were its dripping down below is coming from the passenger side i still cant see anything...

I'd originally taken off the lower intake because coolant was dissipating slowly and cylinder 4 kept fowling plugs and the every morning after letting the car sit it would misfire for 10 to 30 seconds. the oil was always clean, and I did a compression check and I got between 135 and 145 psi...

its leaking between the transmission and the engine. i also tried re torquing the lower intake bolts. with a brand new gasket and a good application of silicone Im not quite sure what I'm missing

well it still leaks. i cant feel or see were its coming from. it never leaked like this before replacing the lower intake gasket but... could it be the frost plugs located behind the flywheel?

hmm, interesting point on the rtv but ive bought a few different tubes from the parts store i guess you never know how old they are though. no I did not pull the heads Btw all try re torquing all the intake bolts if it doesint seal. Thanks for all the help.;)

Well I got the intake pulled off i could see a rust line from were the anti freeze was leaking, it looks the the silicone got thin on the rear passenger side water port. anyone have any tips on how to applying the silicone perfectly?

bump .

Bump

Im about to push this thing off a cliff... let me explain Round one- i bought a fel-pro lower intake gasket set that came with a 2 peace lower intake gasket, its supposedly a new and improved design so installed the kit and used rtv black in the places as directed and to my surprise it...

yeah some mounted pics would be awsome.

why does this thread go to page 8 and stop at page 6?

Basicly I'm trying to wire up four 100 watt lights on my roof im planning on running my power from the battery with a fusible link then thru a switch thats good for 430 watts, then grounding the lights on one of the screws on the roof rack mounting rail, I'm just wondering if 10 gauge wire would...

02 sensors are operating normaly but it looks like im getting low voltage coming from my DPFE sensor. other than that im coming up blank

I Have been averaging 11 to 12 mpg. I have done a full tune up, plugs, wires, air filter, fuel filter, pcv, injector cleaner ect... still 11 to 12 mpg im running out of ideas and even at these cheap gas prices the money adds up pretty fast. is there anything else ive overlooked?

bump.....

so far i have just noticed it when i go to engage the 4x4

bump ive got the same problem, anyone have some ideas?

Im going to look at a 1996 ford explorer tomorrow, heres what the seller said its doing he said the 4x4 was working fine till he parked it for some time, then he went to show the vehical to some one and they tried the 4x4 out, the light comes on but theres no action at the front wheels. as of...