Search results

not sure I can help as the loose bracket was my problem. I suppose a stretched cable or worn bushings (if there are any) could be the problem. Did you check where the cable attaches to the shift lever arm?

You checked the cable bracket, correct?

Easy Job To repair the shifter cable bracket: 1/4 ratchet T-30 Torx bit socket 4 inch extension and about ten minutes of your time, if you use these tools you will be able to access both bolts The bolts are mounted vertically so the heads face the firewall. They are located above the...

Thanks NC, is this accessed by removing the lower dash plastic panel? Or, is it just a matter of getting up underneath without removing any panels. I read the link and it sounds as though one can reach up and tighten it without much trouble. But, wanted to be sure. Thanks again.

I have a 2001 4.0 with auto trans. I've done an archive search but didn't find much. I think I was having problems with what terms to use for the search. Recently, I've noticed that when I shift the lever into park the trans does not "lock" on the detent and it slides backwards on the detent...

In what year did Ford fix the 4.0 timing chain problem? In some cases I'm reading 2000 and older have the problem. In other cases it states through 2001. I have a 2001 and don't know if it has the old or revised design.

window motor For future reference, you can drill out the lower rivet (that holds the motor bracket/window regulator) and rotate the motor about 30 degrees to the right (as you are looking at it) and it will come right out. I used a bolt and locknut/washer to replace the rivet. It's clear of...

window regulator did either of you get the info regarding the regulator removal? I think I need to remove the regulator to replace the power window motor. Any help appreciated. Thanks.

I have power to the rear passenger door window but no noise or movement at all. I assume it is the window motor. I searched the archives and I can't seem to find info on how to replace the motor. 2001 sport trac. Any help appreciated. Thanks.