Search results

Ok Ive got a 93 4x4 with 35s.. My front left tire when I drive but mostly when I turn or put it in 4wd is makein like a clickin/popping noise. Does this mean my hub is busted? Its sounds like somethin is broke, I took a look at my bearings etc and its all fine...Can't figure out what it is. I...

Where can I buy some 1inch Coil Spacers for my 93 X?

Does anyone know if a 2nd Gen hitch will fit a first gen??

How do I tell if my front bearings and rear u-joint is going bad?

Ive got a 93 with 5.5 superlift and a 3inch body. I have 35inch tires on it but the front sags about 1/2inch lower then the back. Is there a 6inch spring I can put in the front to make it level out??

I put a new rebuilt tranny in my truck. I put an external tranny cooler on it to. But when I went to go put it in gears it dont wanna go in gear. If i put it in gear and rev it up u can feel it go in gear and when i let off gas it will go out of gear????

How many qts does my 93 4x4 tranny hold?

Is there any trannys out there that will bolt up to the stock 4.0 of my 93 that is better then the stock one? Also if not I tore mine up is there anything I can do to it to make it stronger?

Im gettin ready to start collecting things for my swap. I just blew my tranny up so Im going to put a 302 swap and a better tranny. But Ive been reading up on all the 302 swaps and there are a ton of cars you can pull them from and a ton on trannys you can use. Would it be best to get a 302 out...

Well Im fixin to get ready to start gettting things together to do a 302 Swap. I was wondering if anyone could give me a little help that knows everything Ill need. Im puttin it in my 93 Explorer. Im going to pull a 302 out of a Mustang I think Im going to try to get the computer and everything...

A buddy of mine has a 93 Ranger Ext Cab 2wd and he wants to put a 3inch body can he clear 32's with just that?

Im wanting to lock the front and back up in my 93. I have the 8.8 in the rear and the stock Dana 35 in the front. My question is I want to put Detriot EZ Lockers in the front and back. What info do I need to know to order them like the splines and stuff?

Im fixing to order a billet grill for my 93 but I have a question about how do I pop my hood after I put it in because the latch is in the grill.

I want to buy me a Cowl Induction hood for my 93. Does anyone else have one on earlier Gen that they can send me some pics of. Also anyone know where they sell them pretty cheap.

Im really starting to look into SAS my 93 now. I was wondering if a Solid Axle out of a 94 Bronco I think would work? Also could someone just make me a lil breif list of like spring mounts and stuff I need?

Has anyone ever seen these tires in action? Im fixin to buy a set of 35x12.50 and I was j/w if anyone knows anything about them.

I just got done rebuilding my 4.0 and its running a lil ruff any one got any good suggestions to tune it up?

On my 93 Ive got 5.5 superlift and a 3inch PA body can I clear 36x12.50 TSL's

On my 93 Ive got 5.5 Superlift and a 3inch PA body lift can I clear the 36x12.50 TSL's?

Do they make a rims adapter so I can put a rim from a CJ7 on my 93 Explorer?

Does anyone know how much tranny fluid the T-Case and Tranny both hold for a 93 explorer? Also is there a seperate fill hole on the T-Case?

I have a 93 explorer with a 5.5 Suspension lift and a 3inch body do yall think I could run 35x15 TSLs?

I had to take my tranny out the other day to do some work and im tryin to put it back in and its not wanting to go in so easy for me. I said screw it for a lil while cause I started to get really pissed off. I didn't wanna break anything else so i got out of there. HA had to get that out of me..

I think it is a EGR Vaccum thing under the upper intake manifold of my 93 explorer. It has vaccum hoses that goes to boths sides of it. Can anyone tell me what hooks to it?

Can some one post some pics of there 4.0 engine. Ive got a 93 model. I was some overhead pics of the whole engine so I can see where some things go and run to.