Search results

so resiliently I have put in a transglow shift in my trans. while finishing up on that I was bolting the down pipe back up to the manifold, and messed up the threads (no so sharp of mind after that one). i was wondering if anyone knows the size and thread pitch so that i can get two new ones...

Hey guys So I replaced my front suspention. But when I got to try and get the boot to stay on the rack to cover the inner tie rod it always pops off when I turn to full lock. I've tried zip ties like so of the threads on here say to do, but when I go to pull it tight it slips off the rack...

okay so my trans has 193,x.. on it and in the past week from backing out of a parking spot than shifting into drive it decides that it doesn't want to go any were. I pull the codes and what pops up it torque converter clutch and solenoid A and B. what happens is while shifting to drive the...

On my last trip to grand junction my car seemed like it didn thave enough power to climb the hill. Just before i left i did a tune up with plugs and wires, fuel filter, oil change and filter, and cleaned my filter (k&n) the mountaineer flet like it was trying a little harder to climb the hill...

ive been reading about adding an oil seperator and decided to get one, the that i got was from home depo. its a husky brand, which some are running from my reading. my question is i went to hook it up but the valve on the bottom of the bowl had sucktion. I hook it up the oppisite direction i did...

while i was browsing this fine form i stumbled across a thread that was talking about some module that controlls a couple gauges. lately my fuel and engine temp gauges have been acting weird. my fuel "sticks" in one spot than drops a good amount when ever, although not all the time. now my...

ive been looking for a few days with no luck. on my 99 mountaineer when it get to about feezing (by temp in car) my drivers window will roll down about an inch and get stuck. to get it down further i have to lightly pull the window down and its fine. ive tooken the panel off and looked to see...

on a 99 mercury mountaineer i was changing my rear wiper motor and the next day my cruise control didnt work. wtf right. so i was browsing the forum and came across a self dignostic and it enters the mode but when i go and puch the on button nothing. so my question is, is there a way to see if...

I've heard mixed reviews on caps but still hasn't brought any real info. My question is would it be worth the investment or a waste of time and money. I have a Kenwood 1000 Watt class d amp with two 12 inch subs. Any info on this would be great.

for give me i didnt know were to put this so feel free to move it. to start i have a 99 mercury mountaineer with the 4.0 sohc. i have a system and been having a problem at night with the lights on and haveing the bass up with having constant power. gauge goes down and the deck starts cutting...

on my 99 4.0 sohc i was changin my coolant temp sensors and the on on the passanger side was just spinning. after taking it off to get a closer look it looks like the brass on the inside stripped out the plastic. what i am wondering is, is it possible to get a hold of the fitting and keep it...

If the pcm sees that under Hood temps are getting too high does it have the ability to turn the fuel pump off? I ask because my 99 4.0 dichotomy dies when the temperature climes into the 90's no other time

Can the rear rotors if warped cause a shake at highway speeds? I ask this because I feel it more in the seat than I do the steering wheel so I know the front is good to go. Any thoughts?

hey guys i just need a second opion on this one, and y i might be running hot on just the highwas. my theroy is i have a walbro 255 in tank pump, a mugen fuel pressure regulater at anout 64 psi. when i just on the highway i give it some gas and it shifts around 3500 but when i get on and...

so i have read a few forums but i didnt find any with my problem. when i go to open the drivers door from the outside door handle i have to pull it pretty much past were it is designed to go and as a resault of it the handle broke. and to even get it to work half the time before it broke i...