Search results

I took my dash apart to install a new stereo and it's wired for the power pedal switch. I have the spot for it and the wiring was behind it. I'm thinking it's doable.

I've looked over the site and I found one thread where someone installed them on an '02 Mountaineer. Since I have the 4th gen, I wasn't sure if it would be the same or not. I've found several from online salvage places but the one I talked to today tried to discourage me from doing it. Said...

You can use 1st gear. You misread it.

You really need the plug that goes to the seats. It should have two wires. Black and a black/white. You can find both those wires running along your door sill. Just tap into them. I've done it that way on a couple of explorers. Works perfect.

You need to get to at least 0 offset. Really need a negative offset though. The positive stuff you posted won't be good.

Thanks guys. I did get the pigtail to this switch and I've looked at the wiring for both rigs. I'm a bit confused on the wiring though. The 96 version has a relay that all the switches goes to. My 94 doesn't have those. I tapped into the two wires that goes to the power lock on the hatch...

Has anyone installed a rear hatch lock switch? I picked up one from the salvage yard from a 2nd gen. I thought I could make it work but I'm not having any luck. Am I right that the 1st gens didn't come with these? I have a 2dr sport.

I just added power seats from a '96 into my '94. I clipped the pigtail from the '96 at the wire loom that runs along the door sill. I just attached the pigtail to the correct wires running along mine and it works like a champ. Wiring colors were the same. Just had to tap into them.