Search results

Problems solved? Now everything is working almost perfectly, I was away for 15 days and the truck was sitting on my driveway all that time, by the time I got back winter was over and temps are above cero now, to my surprise the slipping and shifting problems are gone, the truck is smoother than...

Codes Read I got the codes pulled today, here's the list: 741 TCC 701 EPC 749 Reverse Engage They said I might need a new EPC and valve body, but is that has to be with the "O/D Off" not working at all? I suspect there's a wiring problem also, or the computer maybe? Anyways I'll check...

Code Reading Thanks! I'll get the codes readed, I'll either go to a shop or get the scanner and see what code it is. I first took it to a tranny shop to get it inspected and they said that might be a bad EPC and a valve body gasket blown, but it was too costly to fix it so I started looking...

Check Engine Light The Check Engine Light came on only the day it started doing this, it was only that day and hasn't been on since. I'll check all connectors as soon as I can. Also, any other fuse or relay that is part of the O/D aside from the fuse in the fuse box that I should check...

I just thought I'm missing some info about the problem, the car has 190000km (118000 miles) After going to and back from work now I feel like the transmission is cavitating when you first start moving the truck, at very low speed, or when cornering and accelerating at the same time, you can feel...

Hey guys I have yet another question about overdrive problems, some days ago my transmission got stuck (96 XLT, 4R55 I believe) It wouldn't move at all, with the engine started if I switched to R or D the engine just suddenly died like the tranny was stuck or something. After a few attempts it...

Sorry for the delay replying... The starter is a Prostart CT3100, sold in Canadian Tire. Here's what is in the starter's user manual : PIN #14: Rearm(-) Provides a 1 sec pulse 4 secs after remote start, and 4 secs after run timeout or remote shutdown. Will also provide 1 sec pulse when...

The tires in my truck are showing some wear now, so I might be changing them before the winter comes. One of the local tire stores have a deal of "Delta SUV Sierradial" tires for $99.00 CDN each, installed and balanced, that's a pretty good price compared to others. Have anyone got any...

The yellow/black is upposed to be for dome light supervision. I got the info from bulldogsecurity.com Because lock/unlock from the remote acts like the door lock/unlock button it needs to sense the domelight is on The trigger works this way (this is what I think): When you press lock in the...

Hi all... I posted a thread some time ago about this and I got no answer, at that time I just let it run until now that I want to fix it. I installed a remote starter/keyless entry in the truck. Starter works ok. Now, I needed to arm/disarm my factory alarm when I use the starter keyfob...

I setup a remote starter/keyless entry in my 96XLT, the keyless entry works ok except that it doesn't arm/disarm the factory alarm, only lock/unlocks the doors. It acts like the door button only, if the door is open it will arm the alarm, if not it doesn't. Disarming never works. I know it's...

I installed a remote starter/keyless entry in my X, doors locks and unlocks ok. However I want to arm/disarm my factory antitheft with the starter remote. Disarming should work connecting the OEM Disarm wire in the kick panel (haven't done that yet), Is there an "OEM Arm wire"? The starter is...

That's correct, I installed the Bulldog starter without alarm, my X have the factory alarm installed, the one that shows "THEFT" in the dash when armed, no transponder key. I can activate/deactivate the theft with my factory remote any time when the car is not running. Now, the bulldog's key...

I just installed my remote starter/keyless entry. The remote lock/unlock the doors with no problem. Now I need to find a way to arm the antitheft when locking the doors with the remote. Any ideas on how to do that? The starter is a Bulldog RS1100 thanks...

Hi just bought the Bulldog RS1100, it was fairly easy install after finding out the cables, the ones in my car are different color codes than the schematics in bulldog's web site. Just two things I still need to solve: 1. The keyless entry from the bulldog's remote only lock/unlock the...

Hi all Will any remote starter/keyless entry system like BullDog's or Ungo's activate my Antitheft when locking the doors? Also, will the doors remains locked when you start the engine from the remote or they just unlock the doors and start the car? Does Ungo's starter have the bypass and...