Search results

Thanks guys. I will check the relay in the power box tomorrow. I only checked the fuse you I will look around and see what you mean. Also, I found the inertia switch, knew it was a long shot, but yeah it's fine. Mbrooks420, you say take the access panel off? What access panel are you talking...

If you mean check the fuse under the distributor box under the hood, I have done that and the fuse is fine. I have read about an inertia switch? Would anyone know where that is located on the 92. What else should I look at? Thanks for the reply!

92 first gen explorer. Parked it for the winter and it will not start this spring. I turn the key and hear no sound from the fuel pump. I changed the fuel pump last year and knowing how those Chinese cheap parts last I figured it was probably the pump and went ahead and changed it again...

I know man, I know. I struggled with it so much, messed up. IT SUCKED. Best truck Ive ever owned though, I have well over 300k and motor is original. That clutch though.

It's been a few years. I was hoping to fix it at home myself.

Hey guys. My truck runs and drives, but the front left tire, drivers side front tire, is wearing quickly. I changed all the tires at the same time and three of the them are fine, but the front left one is wearing out very quickly on the inside. The outside of the tire looks great, but the...

Hey guys, I'm back. My last post I had a clutch problem. Worst thing of my life. Ended up taking it to a professional, they fixed it, and I took her for 3,000 mile fishing trip the last two months... But, I haven't had brake lights for two months. Here's the clues. It has to do with when I...

Can I buy a 1994 hydraulic line and connect that to the master and slave?

I've tried and tried. I have a 92 ford explorer. I changed the Slave with a 94 ford slave. I put the tranny back in, hooked everything back up, filled everything with fluid. Then I went to attach the Clutch line...wouldnt snap in. I tried and tried, so I go and buy a brand new Master with...

So if I messed up the end of the clutch line trying to get it off with a flathead, what can I do to make it snap in?

I tried to get pictures this morning, but my phone is horrible so I am going to wait for the girlfriend to get home to snap a few new ones. What I need to know is if a 1994 master cylinder and clutch line will install onto my 92 truck, and then if I hook it up to my 94 slave, will the truck...

I made a horrible mistake. I'm embarrassed to write what happened, and I hope you guys don't judge me too hard. When I bought the part, the guy told me it was for a 1992 Ford Explorer. I installed it, put the tranny back on, and now I am finding out that the receipt says 1994 clutch. I can't...

After hours of work, getting the transmission back in, everything hooked back up, the clutch line will not connect to my new slave... I have tried everything and am giving it plenty of pressure and changed the O-ring. I just can't believe it. The old slave had a metal bottom, this one had a...

Thanks guys, ill get it on tomorrow. When I tried to get the tranny up and over the exhaust the metal drive sticking out from the slave was hitting and pushing in the fingers on pressure plate...I hope its ok, but it looked fine. I took the clutch off and to a local tranny shop. The old men...

I can not get the tranny back in. It took me almost 4 hours to get the tranny up and over the exhaust. I should have taken out the Y bar. Hours after hours of fighting with the tranny to get it up and over the exhaust.I finally got it up and over the damn bar, and now I can not get it to line up...

Thanks for the video on the clutch. I will pull it off tomorrow and post pictures. But from my YouTube video, I was shocked to see the condition, would you guyssay it looks ok? That slave though, I can't believe the condition of it.

How do I check if it went into the clutch lining? I would like to save money, is there anyway I can just take off the clutch pieces, wipe everything down replace and install. I know I would hate to get it all back together and still not have a working truck...but it does come down to money...

From the bottom of my heart, thank you guys for everything. I have never done any work on a truck and went after the clutch. I think if I knew any better I would have never started. You guys helped me out at every turn. It was the hardest thing I have ever done, but I got the transmission to...

I got the transfer case out last night, that was the hardest thing to remove. Today I am going to try and drop the tranny. I am really worried about the exhaust... It looks like someone has cut the exhaust and welded it back together 3 times in the lifetime of this truck. I am worried I will...

I just found out that there is a panel that I can access the transfer case from the cab of the truck. I cut the carpet back away from the shifter inside the cab. I cut through some insulation and thick carpet and removed four bolts that were holding on a panel. I removed the panel and am now...

Thank you fire phoenix. My bad, and will order that way. I just got to the transfer case...this son of a b*tch. I have no idea how I am going to get the transfer case off, but I'm starting to watch a lot of youtube videos. The girlfriend posted a video of the truck on our facebook page if...

Howdy, So I started this job a few days ago. Right when I got under the hood my neighbor wanted to take his boat out and go deep sea fishing so I got sidetracked the last two days with that. I have never really worked on cars, and all I have is a cheap tool set from Home Depot. Luckily I...

Thanks for the info about the timing chain, the girlfriend got a laugh when I told her what the previous poster has said and then your post. I have researched a lot, and am excited to go. Do you think that I should drop the trans out, look at the slave and clutch before I go and buy a kit...

Thanks guys. Please keep checking this post as I may have some questions come up. You guys seem to think that it is the clutch and not something simple like the master cylinder because of the earlier leaking fluid. Is this the ebay kit I need. All I can find on ebay is kits for 93-00 explorer...

Good evening guys, Long story short, the explorer has started to break down more and more in the last year. Every time it is something simple, or less then a hundred bucks, and I change it myself and get it back on the road. I've added some photos, but pretty much it is just a traveling...

Thanks for the input. After a little research I tried to bleed the system. I first took a syringe and pumped fluid through the system while I was loosening the drip nut below. After I did this, I jumped in the truck and I had more pressure then ever in the clutch. I pumped it a few times...

Hopefully everyone had a great Christmas. My question deals with my clutch on an old explorer that I just keep trying with madness to keep on the road. 1992 Manual 5 speed explorer. The other day while I was driving to work I felt like I lost pressure in the clutch. I would push the pedal...

Hey guys from florida, hope everyone in the north is surviving the cold. Little update, my last post I was having trouble with the truck not starting after hot. Well, after doing everything everyone suggested I can say it was never fixed, but, I drove it all the way from Michigan to Florida a...

And thank you two stroke. Its just that there was so much info, it was hard to take it all in. Im very much a novice and was starting easy. I did change the ignition coil packs...to no luck. I will look into the sensors you posted. Also to mrshorty. I can't afford the fuel test kit yet, I do...

I'm gonna get the gauge and check the fuel pressure tomorrow when it stalls out and I will report back. Thanks for all the help.

Ok, I pulled the vacuum line off the FPR. No gas I can see leaked out of it, but the engine is cold right now

Alright, I found the FPR. I don't see a vacuum line, there is something coming off the top, and something coming in the back side, which one is the vacuum line. Also, im going to go buy that tool to check the fuel pressure...but how do I check it when it is acting up? Do I start it, see its...

Thanks Mr shorty. The sound could be from the pump, but I just changed it...I haven't done the fuel pressure check like you said, to be honest it seemed overwhelming and i have no idea how the fuel system works, do I need any special tools? At this point I think you're right. We are on the road...

And a brand new alternator

The radiator should be full,brand new and flushed but I'll recheck. I don't have a check engine light on. I have two batteries in the truck, both brand new. Can someone please answer this. When I turn the key to on, under the hood, something makes a sound, like it is engaging something. Hums...

Hey guys, im posting from my phone bare with me... Well, I drove from MI to FL this week. The truck is running fine for the most part and not overheating....but the rough starts have not gone away. Its getting worse. I changed the ECT and Ignition control, and IAC, and fuel pump. Every...

I FOUND IT! Thanks man, if you really are in North Idaho, I fly fish Montana a lot, and if I am in your area I would love to buy you a beer. I'm in michigan, it is nasty and cold, I walked out with the flashlight and found the solenoid behind the headlight and followed the hose, and it was...

I owe you, it's too dark or I would post some pictures. How would this affect my truck? I'm shocked because I thought I would see a lose hose hanging somewhere but it's just vanished.

Can someone please tell me where the CANP solenoid is and the Charcoal Canister?

Thank you, so how will this affect the truck, I have to think it hasn't been on for a very long time. I'm going to go and try to attach it tomorrow. So, it goes from the piece of metal that shoots down, to the solenoid, to the canister to the vacuum area in the back of the engine that has like 5...