Search results

The metra radio car wiring plug from an autozone or other automotive store have been very good over the years, without having to butcher up the factory plug(s). See if the window motor will work from the window switch located in the actual door you are having issues with.

What tuner do you have? Do I absolutely need a tuner to install a tune. Was looking for something I could actually program. Like looking at afr with wideband, and making adjustments. But for now just an uploadable tune might be fine for now without the handheld if possible.

Looking for what tuner to purchase. Swapped 99 Explorer 5.0 into 01 Sport Trac. Swapped pats over, swapped g sensor over, all gauges and theft light, and rpm function as it should. I put new Torque Monsters in, removed rear cats as one was crushed. At the moment have rear o2 sensors zip tied out...

How many miles on the sport trac? It could be the fuel pump, or even filter. Best way to tell is autozone has a loan-a-tool problem and you can get a fuel pressure tester. Your truck has a valve on the fuel rail, think almost like a car tire. You would just check it there. Then if fuel pressure...

It’s the 4th pic if yours down. Not the pic with the 45 degree driveshaft😛.

Are your leaf springs pretty flat because of sire size or lift? Just don’t see how you would have any flex in them at all.

So just kinda slowly finishing up a 2000 explorer 5.0 into my 2001 sport trac job 2. As some of you may know the 5.0 ecu puts out a pulsed 12v output as the 2001 ST put out a ground to flash the theft light. What I have done ( was just going to wire a relay, but 12v wouldn’t even pulse a 30 amp...

WOW!! This is exactly how I am wanting mine to sound. Can you give any information as to how it was setup at that time?

Does anybody have a wiring diagram for 01 sport trac? Need to wire patsb module into sport trac as it is apparently patsE, and the 99 donor explorer is patsB. My email is csiebenthall@hotmail.com Thank you for any and all help!!

Im actually in-process of putting a 2000 explorer 5.0 motor and the 4r70w transmission mated to it into my 2001 4wd sport trac. Originally I was going to put it into a 2004 ST truck, but it was only 2wd, I will need to get the transfer case from a 99-2003 f150 (4406 if I recall correctly) as...

To the OP, did you ever finish the truck? You had mentioned a paper copy of the fuel pump delivery module, is that something you still have? Like you, Im trying to do all the research stuff, so I have something to refer to for the wiring. Im putting a 2000 explorer 5.0 into a 04 ST. Thank you...

Hi, looking for the 42 pinout under the hood for a 2000 explorer 5.0 awd eddiebauer, and my 2001 sport trac job2. Any information would greatly be appreciated.

It’s getting there. Trying to get everything in order!

I guess a 4406 will be in the works! I like the 4wd over awd. Do you need a different rear drive shaft? Specs show my 01 sport trac at 125” wheelbase, and the 99 explorer at 111”. Lastly what year f150’s 4406 transfer case would anyone recommend for this setup. Thank you all for the help!

2001 Sport Trac

I have a 2001 sohc 4.0 sport trac 4wd. My donor vehicle is a 2000 5.0 explorer eddie bauer. I believe it is AWD, did not see any selectors, like in my truck for 2wd, 4hi, 4low, so Im guessing my ST will be awd when completed. Question is isn’t the awd controlled in each differential? Also are...

Just had same issue..... changed one at at time..... found 2 plug wires were not “ clicked” fully onto spark plug. I purchased new wires from rock auto, the old boots just didnt want to stretch over the plug. Hope this helps.

Hey buddy, I was reading a post about power adders ( heads) on the sport trac, and you mentioned the Greenville dragstrip. Where about do you live? I just got my 01 ST, I live in Chesnee. Do they have any meets or the like ariund here? I had a miata before this an did the whole supercharged-E85...