Search results

This seems to be happening alot latley, my 1993 xlt has done it twice in the last year and a half. Its been about four months since I last fixed it so im keeping my fingers crossed. I know all about that y-pipe to, the first time I took the tranny I didn't remove it and wasted two hours trying...

The same exact thing happened to me twice now, I have a 93 XLT with 110,000 mile on it. It first happened back in april and I fixed it myself and then it did it again in october and I had to fix it again. I have been dropping the starter about once a month to check on it and it seems fine so...

my 93 xlt emits a rich fuel smell sometimes when I start it up and shut it down, could this be my cats going out on me?

Has anyone bought an engine or tranny from ford for their explorer and if so what was your experience?

I would love to try and rebuild it myself but don't really have the time or place to do it and it being my only mode of mobility right now I don't have the luxury to tinker with it right now. Thanks for all the info.

Where did you buy a new one from?

I am contiplating replacing my engine, anyone have any suggestions on a good place to buy a 4.0 for a 93 explorer. Was thinking of getting a long block and going from there but has any one bought a crate engine ready to drop in and if so how much was it? Thanks in advance.

Has anyone had any experience in dealing with Phoenix Remanufactured Transmissions? They have a A4LD tranny for $650 and a $250 core charge. I found them through e-bay and after checking out their web site it sounds like a pretty good deal.http://www.phoenixhardparts.com/Merchant2/merchant.mv

My truck has a slight shake to it at idol but not to bad. I just got my truck back together las night and it runs fine now, the old flywheel is another story though when I got it off it had four diffrent cracks coming out from the center, it was pretty bad. Lets just say im getting really good...

Im glad i'm not the only one with this problem, happened to me back in april and I fixed it and it did it again just yesterday, i'm in the process of fixing it now but sure would like to know what causes this to happen, someone told me I might have a vibration problem in my engine.

Back in april I had to change my flywheel because it had cracked coming from the center outward, well a couple of days ago I was having the same symptoms and sure enough I took the starter out and I could see the it was cracking again. Does anyone have any suggestions as to why this might be...

Whats the average price youve paid to have your a/c charged with freon?

Im having this problem with my explorer, whenever I fill my tank up with gas and and I go to start it to leave the gas station it doesnt want to start, it'll turn over but wont start. Usually it wont start the first time but it will start on the second try, but today it took about three times...

Sounds like what happened to my truck, when I would try to start it it would make a grinding noise like when you try to start an engine while its already running, so after chasing a few things around I saw that my flexplate had cracked while looking up through the starter hole, so I dropped my...

No teeth were missing, it was cracking from the inside out, Ill have to see if I can get the pictures to post, or could you get them to come up?

After chasing the grinding noise upon start up noise into the ground I finally realized what the problem was when I looked into the starter hole at the flywheel, after spending the day taking out the tranny(and yes you do have to remove the y-pipe, I figured this out the hard way for about an...

Anyone have any advice on flywheels, I need to replace mine and was wondering if one from napa will work fine or if I should look around for another.

:fire: Well I finally found out what was causing the grinding noise when I started my truck, it ended up being that my flywheel is cracked in a circular motion around the flywheeland the inner peice of the cracked part is peeling up and is touching the engine thus creating the grinding...

Nope, upon removing the new starter for another inspection the flywheel was in a diffrent position than the first time I had the starter off and I could see that my flywheel is cracked, starting from somewhere in the middle of it and working its way outward, kind of looks like it's just peeling...

It just started doing it this morning when my wife went to go to school, I drove it last night and it was fine, but now it does it everytime you try to start it, when I took the old starter off you could see where the starter teeth had been grinding on the flywheel kind of like it wasnt engaging...

Heres my problem, when I go to start the engine I get a grinding noise like you get when you try to start the engine with it already running, I did the whole search thing and what I found pointed to the starter itself, so I replaced it with a new starter and silinoid but the problem is still...

http://www.phoenixhardparts.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=PRT&Category_Code=FAT

Try this place out of Phoenix, Arizona: http://www.phoenixhardparts.com/images/torqueconvertors/special.htm They have an A4LD tranny for $650 plus a core charge.:bounce:

I have the same problem on my 93 xlt, and as much as it rains here in oregon its a big problem, I fixed it for a while by filling the two gutters with silicone where they meet up with the top of the windshield, but it seems to have come back latley, was thinking about dropping the headliner and...

Question- I have a stock 93 explorer and want to put a 3 in body lift on it, what is the biggest tire size I can go without having to mess with the gears?

for a while every time I would shut off the truck the speakers would make a popping sound, then the other day the radio would not work at all. The radio it self seems to be working fine it's just that no sound comes from any of the speakers, it'll come on every once in a while as im driving...