Search results

Well runs great from a cold start and i will drive it to the store and other places but once the engine is warm the engine wont start get spark and fuel and air and turns over easily but wont kick on. I have read that the fuel tank sensor is to blame? is this correct? Also is the stock...

Does anyone know how to do this for a stock v6 cluster? I have searched the forum but i didn't see anything spacificly on this. I have a 302 in it and its like reving like way way past the redline it actually bottoms out the tach.

Getting my swap going for real now and i got the radiator in and fans hooked up and was warming it up to time it, and the #8 cyl makes that header pipe glow red? I havent gotten the exaust on it yet so the 02s arent in it. Is this something else besides an 02 issue or what? Any thoughts would...

I was going to sell this beast but i am re-motivated to actually finish it. I can start it up but it will only run for like a few seconds? i can get it to stay running by removing the air filter and putting my hand over the hole and "choking" the engine. Ive checked all the places...

Does anyone know where i can get the end piece that goes into the stock master cylinder for an -an fitting? MY hose warehouse doesnt carry them or it. I can get a picture if you dont know what im taking about.

Balls? Beauty?

I found a guy that makes custome harnesses for the 5.0 swaps hes making mine right now. He charges 300 but he provides everything includin the o2 harness and injector harness for the 5.0 I'll post his e-maill address for everyone once i have the harness and let you all know how it works out...

Hedman makes some for for about $130 the part number is HED-89500, I just thought I'd post this for someone who didnt know. I'm nearly complete with my swap all i need is my radiator and a few engine acc.

Will this work for the upper intake from a stock 5.0 mustang? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7931584683&rd=1&sspagename=STRK%3AMEWN%3AIT Im thinkin it would but the one pieces i took off were tapered? i cant tell.

Does anyone know how long it take for AA to get these made? THey keep telling me a line everytime i call them, I ordered mine on March 23rd and they tell me " oh it will be 10 days" after the 10 days its "oh it will be two more weeks"? Does anyone know someone there who i could talk to to get...

Where can i get a hydraulic through out bearing that is used for a ford ranger Explorer t-5 swap?

I heard that 94-95 mustangs have a shorter front accessory drive than the 87-93's? Is that true? If its not is there a combination of brackets that i could get to get some more room up front for the 5.0 conversion

Im getting my lift in to get the space for the swap, Im having a little trouble. I got all the bolts out, two broke the Front Drivers side under the radiator and the rear passengers side in the very back broke too..... How the heck am i supposed to get those out? And alos do the nuts...

Sometimes when i start it up the starter doesnt engage the flywheel, it makes a loud gringing noise. When the clutch is out i can hear like a whizzing noise from the shift boot, when i depress the clutch it does away but when i let it out it comes back. Could my flywheel have cracked? I...

somehow when i was taking off the old fuel filter one end broke off in the fuel line, doesn anyone know how i would pull it out of the line? It broke right at the ring in the middle of the filter nipple on the inlet side, and i have no idea how to get it out, the ring split in half and thisis...

I have a explorer hayans and it has a picture of the IAC? Can someone tell me where it is? Is it on the stock AIR box? Or is it on top of the upper intake manifold right behind the TPS? I though i didnt have on because in the manual it looks like that little thing on the back of the...

ok i have checked my IAC, turns out i dont have one of those. Apperantly i took it out with the air box. WHen i made that custom K&N adapter thing i have. PCV makes noise when i shake it. My check engine light is on sometimes and i took it to a buddys house of mine and put it on a code...

Seems like everytime i put 500 miles on my X it loses enough coolant to stop the heat from coming out of the heater core. Where the heck is it going? Doenst comput the exaust and also doent leak on the ground? where could it go? oh and the oil is fine didnt blow the head gasket.....

ok when i started it it made a loud grinding noise and ran find i got to my destination and when i went to leave i started it again no grind but the motor is missing like mad in the 6th cylinder. i rev it up and it has a huge gap where the is no ignition somewhere. Is this the timing? How do you...

Do they make a gear drive for the 4.0?

I asked a local shop to test mine and see if it was bad and they never heard of them going out?

will a SOHC fit on a 1st gen explorer without too many custom parts?

canyou even fit cobra r's on a 91 explorer 4x4? I thought the hubs are iun the way, i did a search for it and a guy with a 2000 XLT has them on it. let me know thank you.

How much is the diablo chip and can anyone on here get me a good price on one? I HAve the money right now i just need a chip badly.

what should i put in it? just got it rebuilt and i need some opinions on what i should use in them. what goes in a t-case anyways, they never told me.