Search results

I understand. Thanks....

That agrees exactly with mine on the front mounting bolts on the cross member. I think my issue is with the rear mounting point. That is where I get 22 inches. I did find out that I can buy a Frame and Body dimensions book intended for body shops for $150. I called a body shop that I've...

My 98 Explorer took a blow to the right front wheel. I'm having some alignment issues. There is no evidence that the frame is bent buy I would like to confirm that the lower rear contol arm (A frame) mounting point is not pushed inboard. I would really appreciate it if someone could give me a...

Bent Door Thanks, The "experts" kept telling me that the doors were not compatable. I suspected that the shells were identicle. The 95 that I pulled the door from had been hit pretty severely on the drivers side. I could not see any damage or evidence of distortion but it must be sprung...

I have some damage to my passenger side door and lower corner of the hinge pillar and rocker on my 98 Eddie. The body damage is repaired and everything is straight and correct. Hinge location etc. I picked up a door from a 95 that looks like an exact repalacement. with everything else fitted...

65,000

I recently purchased a 2WD 98 Eddy Bauer with 5.0L V8 with a 4R70W automatic transmission. I've done some research that leads me to believe that all of the 4WD components will bolt up. I have a 98 4R70W from a 4WD that I can use the tail housing and output shaft from. I am a mechanic and am...

I just picked up a very clean low milage 98 Eddy Bauer 5.0 2WD. I would like to convert it to 4WD. I know that all of the parts will bolt up but I have questions PMC shifting functions or work arounds. Could anyone direct me to the information that I need. I did a search and found some...