4r55e

1995 explorer 4.0 4r55e(I think). Intermittent o/d slipping. Ok here goes, 1st thru 4th are fine. When cold o/d works but once the truck is warmed up it will sometimes slip so bad that it throws code 648. Now it doesn't always slip, if I am cruising down the freeway its fine but if I have to...

Technical Expertise required. I start to see transmission fluid in my coolant reservoir, assume that it is the radiator, buy one, and tell my kid to take the explorer and the radiator over to the mechanic. I go out of town for 10 days for my work and the kid drives the explorer around the...

Hello, I'm new to these forums and threads so you will have to excuse me if I am doing anything wrong. My problem is that I was leaking fluid from my trans pan and had a broken off bolt so I took off the pan and removed the broken bolt and threaded for a slightly larger size bolt to fit. While...

First off let me say that I had bought a new tranny (Ford part # F87Z-7V000-LARM)-not sure if it's a "4R55E or a 5R55E" installed by Cottman Transmissions at 151,000 miles, mainly because of the OD light issue and it slipping a lot. Pulled a boat for a few summers. Anyways, now there is...

Hi. My 96 Explorer 4.0 SOHC auto had a 4r55e transmission that died a while ago. I found a 98 5r55e box that was working fine i the donorcar. as i read on this forum, i changed over EPC og TCC valves from the 4 speed box. The intension is to get the 5speed box working as a 4 speed. BUT, with...

Where can I find rebuild instructions, torque specifications, details of component locations, and diagrams for 1998 Explorer 4X4 automatic transmission 4R55E?

I'm installing a new 4r55e into my '97 explorer. Tranny tech told me that it should take up to 11-12 qts of atf. He said to not to remove the TC and just install the tranny and put 5qts in the tranny and crank it up (he said this will fill the TC), then add as needed. I have since 5 1/2 more qts...