8.8

Mid-job on my rear axle shaft replacement on my 91X and the spider gears fell out. I was using my impact to try to pull the new wheel studs through the newly installed axle and it looks like the S-spring shifted a bit and the spider gears slipped out. I have the spacers and know which one was on...

Posting in case anyone else needs the INFO: The Dana 44/AMG 20/Ford 8.8 share almost the same axle gear thrust washer as the 31 spline Ford 9 inch. Found this out when I was checking clearances for my Aussie Locker in my 9 inch. I'm out of spec so I called Tech and ran some measurements with...

I was wanting to make locker selection easier by creating a list for 1st 2nd and 3rd gen Xploders. this first posting will be reserved for 1st gen. second posting for 2nd and so on. as comments are added i will update the information. not all of this information has been verified i am contacting...

Would anyone know or know where i could find information on the differences between rear axles shafts in a 1985 to a 1989 F150 with a 8.8 differential.

got an 8.8 i pulled the coer off, drained the oil. pulled the c clips, pulled the axles, pulled the ring gear, kept the bearings and races and seperate. cant get the pinion out... got the nut off and the flange the driveshaft bolts to. i have beat it with 3 lb hammer and a block of oak and it...