blower motor resistor

My girlfriend has a 2008 Mercury Mountaineer. Manual climate controls with one zone up front and also manual rear controls. About a year ago, her car randomly was only able to run A/C, motor speed was adjustable, and front vents only. Her stepfather went in to try to figure it out, found out...

I have a 2007 XLT Explorer. My AC only works on fan settings 2 and 3 (1 and 4 basically turn off the air.) I've changed the blower motor resistor as well as the switch on the dashboard, neither of which solved the problem. 2 and 3 also work when I switch to any of the other settings on the right...

I have a 2011 Ford Explorer XLT 2WD and the front blower motor stopped working. I’ve replaced the fuse, checked the relay, replaced the resistor and the blower motor and it still won’t run. Any other suggestions?

My blower just stopped pushing air. We have changed the fuses, this did not fix the issue, we have replaced the resistor, this did not fix the issue. We are struggling to figure out a cause. All we know is the Blower Motor is not getting power. Once we jump it the blower motor works great but...

I am having some problems with my climate control in my 2002 explorer sport trac. On fan settings 1,2, and 3 there is no air coming from the vent. However, on the high setting, 4, they both work just fine. I read that this can be related to the blower motor resistor so checked that out. It was a...

If you're short on time, skip to the synopsis in the last paragraph. My front blower motor started having issues several months ago. I was driving around and the AC was blowing great. Turned off the truck for a few minutes, turned it back on, and the AC didn't turn on. I proceeded to turn the...

Just did this repair by following a three part YouTube video series. Took about 40 minutes going through the glove box per the video. Much easier than going underneath the dash as some videos did. For those interested in this fix here are the links for the 3 videos by Johnny Oudomsouk. FYI - the...

i have a 2004 ford explorer 6 cylinder. when i turn on my ac, i hardly get any airflow on all speeds. when i turn it to hot i will get clicking....i know this is a bad blend door actuator. Is having the bad actuator the reason for me not getting any airflow at my vents or is that gonna be caused...

I have my XLT 4 WD since it was brand new with 6 miles on it. It now has 220,000 and has been through a lot- although for the most part sill looks pretty good. It's been through several wrecks - been put back together several times. The original engine blew at about 150,000 - both of the...

I have done a lot of reading and research trying to figure this one out, so if anyone can help that would be much appreciated. I got in my 2006 Ford Explorer XLT 4.0 4WD and no air was coming through. I ran a couple things like switching from heat to AC, and toggling the speeds 1-4, along with...