flywheel

1st post so ty in advance for any help Flashing check engine light as I pass local AutoZone. so I pull in to use their OBD2 scan tool which gives error codes in cylinder 1 and cylinder 5 misfires upon returning to my vehicle attempt to start and starter spins but won't engage the flywheel have...

Alright. I've got a 93 Explorer Sport 4x4. My clutch started slipping. It got pretty bad pretty quickly, despite having the clutch replaced at the end of last year. I have concluded that the rear main seal probably failed and leaked oil onto my clutch. Either that, or the flywheel failed. Either...

So just finished my engine swap '98 into a '01. Starts up great but I've got a weird knocking coming from the bell housing. It's random and less frequent in park and neutral. In reverse and drive though it creates engine shaking and the truck dies.i torqued down the flywheel buts to converter to...

I have a 1993 Explorer Sport, 5spd 4x4. About two weeks ago my starter went out, and i had to push start her to get her home. i bought a remanned starter from Advance, and put it in. When i took the old starter out, the haress holding the battery cable up beneath the oil pan snapped. Finished...

:rangergreen:I am a proud owner of a 91 exploder with a manual tranny and the 4.0 v6, nicknamed thumper, due to the bad lifter and my stereo system. I absolutely love it. Anyway, now to the pont, my engine started leaking oil, right at the bell housing? I know my way around the top part but not...

My 1995 Explorer with a 4.0 V6 and 175K died while driving up a hill and all power was lost after hearing a clunk. Now the truck turns over but will not start. When the engine is turning over the serpentine belt does not turn with it. The belt is mounted correctly on all the pulleys but the...

Basically i was wondering what transmissions are easily interchangeable with in Fords vehichle line up,I have a 1999 5.0 2wd AUTO,so,would the 4.0 tranny work with the 5.0 or would the f150 have the same drive train and possibly and could i use a mustang tranny,I am looking on craigslist trying...

So ive been here done that but a long time ago when the internet didnt yet exist. My problem is this and Im thinking Im not the only one who has encountered this problem. I am removing the transmission and replacing it on my 98 Mercury Mountaineer 4x4 all wheel drive. Everything is going as...

Hi, I just replaced the starter after hearind a scraping noise that started a week earlier. The new starter seemed to eliminate the noise totally for three or four days then it stareted scraping again but three times louder than usual. Does it about every 5th startup or so. I'd appreciate...

Hi Everyone! Okay, I'll try and keep this brief. I have a UK spec 1997 Ford Explorer 4.0. I love it. It takes me, the wife, the kids and all our stuff to the beach and mountains of North Wales and pulls the boat or the caravan. Its great. And it starts and runs great. Or it did do. Here's...

I have a 1991 ford explorer 4x4 4.0l automatic no mods yet I got its a couple months ago and it has been running great. Very very smooth no cricks or noises a small possible tranny or oil pan leak its dirty didnt get the chance to look at it closely. but leak is very small not enouph to leak...

OK so my 91 explorer 4.0,The starter started grinding recently also a little of a rough idle.Well now all it does when i try to start it is grind loudly so I took off the starter and there was a deep grind indention on the tip of the housing in front of the starter wheel.So I took it back and...

mblake08 01-15-2010 08:02 PM mblake08 i have a 95 ford ranger 4.0 liter V6 4x4. ok here we go... two years ago i had to replace my flywheel because it broke off right at the crank.. no idea y it did! so i replaced the engine two months later cuz of engine sludge from my dad no taking car of...