gaskets

Hey All, I've got a '96 Ford Explorer 4.0L SOHC. I went to replace my fuel injectors and the small plastic ending from one of them went down into the intake manifold. So I've decided to remove it, the valve covers, and the heads while I'm at it since I have some coolant coming out of the...

How difficult is changing the oil pan gasket on a 2015 PIU?

Can someone please help me, just brought a 98 explorer sport 4.0 sohc engine 138.000 miles and im not sure if i have blown head gaskets, it does not smoke, it does not mix oil/coolant, it is not over heating what i do nitice upon review is small drips of water thru exhaust but stops when it...

Hey Everyone! I have just got my first Explorer and I live in Australia and am experiencing some serious lack of information as the Explorer has not been around here since 2005. Grummpy!

Hey everyone. I'm going to try and change my valve cover gaskets this weekend and I have a few questions on the procedure. My Haynes manual says that you need to remove the upper intake manifold to get the valve cover off for 99 and later models. Is this really necessary? It also says to push...

I'm getting ready to replace the lower intake manifold gaskets on a 1997 Mouny with the 5.0 V8 due to leaking coolant in the front driver's side. It's right at the corner, and around the most forward bolt that also holds the coil pack. Anything I should watch for? I didn't see anything in the...

Putting in a new clutch in a 1994 Expl at 113,000 miles. Had to remove the manual transmission and transfer case as a unit as they would not separate; it's like the gasket has glued them together. Would rather put them back on the car one after another, making it easier to handle the weight and...

Ok, I've got a 02 EB X and my passenger side exhaust manifold gasket is leaking horribly. I put it on the rack today to change out the gaskets, however, this is a huge pain. There is no room. Is there anyone who has done this that knows some tricks to getting to all of the manifold bolts...

I have a 94 Explorer XLT, I took apart the engine because the head gaskets were done, but I discovered the cylinder heads were cracked. The intake manifold was corroded and I might need new Exhaust manifolds as well. Im 17 I start college in mid january. So im wanting to fix it for school. i...