not shifting

Hello, This Explorer will not shift into gear while the engine is on. The clutch is less than three years old. I visually checked the slave cylinder through the rubber plug in the bellhousing and it is dry, therefore I'm assuming it's okay. The master cylinder fluid reservoir was empty. I...

Hello, My 98 Explorer will not shift into gear, including reverse. If the engine is not running, I can easily shift into all gears. Once I'm in gear with the engine off, and then start the engine (I tried this with first gear and reverse on my driveway), I can go, yet it's as if once the...

I just bought a 1995 Explorer 2WD, 4DR Eddie Bauer, for my son. It hadn't been driven in 5 years. New fuel pump and battery and it was running. I replaced all the fluids etc. and when replacing the Tranny fluid and filter I put new gaskets on the Valve Body because it was had some slippage. I am...

In need of some help. I've got a 2000 explorer with the 4.0 and 5r55w with 4405. First off it will shift into rev 1 2 and 3 but I have no 4th or of. I've been told that maybe the speed sensor or transfer case could be causing the problem. O and I've already put another transmission in and did...

Hi All, First time poster, but use the site a lot for various issues I have had with my 2003 Ford Explorer V8 Eddie Bauer. I've had it for 4 years, and replaced the transmission 1.5 years ago. Now, with 163Km on it, the transmission is coming out of gear. While I'm accelerating and the...