on | Ford Explorer - Ford Ranger Forums - Serious Explorations

  • Register Today It's free! This box and some ads will disappear once registered!

on

  1. A multimeter is on my wrist.

    A multimeter is on my wrist.

  2. The 1995 taillight is on the left. The 1996 taillight is on the right.

    The 1995 taillight is on the left. The 1996 taillight is on the right.

    This is a side by comparison between the socket holes on two Aerostar taillights.
  3. The taillight on the left is the finished product.

    The taillight on the left is the finished product.

  4. The pipe on the rear of the unit has three O rings.

    The pipe on the rear of the unit has three O rings.

  5. Insert the tool, and pull on the pipe to disconnect.

    Insert the tool, and pull on the pipe to disconnect.

  6. Lift the clip, then pull on the shock.

    Lift the clip, then pull on the shock.

    Lift support shock removal.
  7. Two Torx head screws on the side.

    Two Torx head screws on the side.

  8. Two screws on the back.

    Two screws on the back.

  9. The paper on the back of the face plate is peeled off.

    The paper on the back of the face plate is peeled off.

  10. Temperature sensor on the evaporator.

    Temperature sensor on the evaporator.

  11. Freon tank on a scale.

    Freon tank on a scale.

  12. A low freon charge will cause ice to build up on the line coming from the e

    A low freon charge will cause ice to build up on the line coming from the e

  13. Anti-rattle clip on the inner brake pad.

    Anti-rattle clip on the inner brake pad.

  14. Compressor oil on a scale.

    Compressor oil on a scale.

  15. The back panel on the refrigerator.

    The back panel on the refrigerator.

  16. The 3 prongs on the compressor.

    The 3 prongs on the compressor.

  17. The lower linkage on the latch.

    The lower linkage on the latch.

  18. Front disc brakes on a rear wheel drive exploded view.

    Front disc brakes on a rear wheel drive exploded view.

  19. The caliper pin tool has a groove on the handle.

    The caliper pin tool has a groove on the handle.

  20. Rear ABS sensor on the top of the differential.

    Rear ABS sensor on the top of the differential.

  21. Brake & RABS lights on.

    Brake & RABS lights on.

  22. Testing electrical connections on a thermocouple.

    Testing electrical connections on a thermocouple.

    The wire is positive, and the output tip is negative (positive ground) on the thermocouple that was tested.
  23. Air test plate on top of gasket material.

    Air test plate on top of gasket material.

  24. The power door lock fuse is on the left with the green stripe.

    The power door lock fuse is on the left with the green stripe.

  25. The oven is on.

    The oven is on.

Top