pin | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

pin

  1. S

    Door hinge pins

    Will the OEM Ford door hinge pins with bushings fit a Mazda B series truck?
  2. M

    Ignition tumbler came out!

    New member with a 2010 limited. I got in and turned the key, and the ignition tumbler came out. A pin that holds it in place broke. Anybody know what the part is called?
  3. C

    08 Ford Explorer 5r55s transmission part? Need Help.

    Hey guys! I'm new to the forums and first time owner of a explorer. I just recently bought one with a bad transmission. When I tore it down for the rebuild I noticed there was a rod broken underneath the reverse servo it holds the reverse band strut in place. I can't find this rod anywhere does...
  4. T

    Rear brake caliper pin kit ??

    1996 Explorer Sport 4.0 4wheel disc brakes. I started noticing a loud clanking noise coming from the rear of the truck when I would get close to the center median or on a bridge. I pulled off rear driver wheel to see that my Caliper is very loose and the whole thing along with the rotor...
  5. Universal 4 wire oxygen sensor pin out.

    Universal 4 wire oxygen sensor pin out.

  6. Air Charge Temperature Sensor Pin Out.

    Air Charge Temperature Sensor Pin Out.

  7. A

    7-way trailer plug

    Hi, A few weeks ago I pulled of the right backlight and connected a 7-way trailer plug to the plug that was there. Anyhow it works OK except that I´m missing the fog light and when I hit the brake the direction lights on the trailer light up and not the brake light. The result is that it...
  8. The locking pin in its holder.

    The locking pin in its holder.

  9. A hole is made for the locking pin.

    A hole is made for the locking pin.

  10. The top pin is in, and the bottom one is next.

    The top pin is in, and the bottom one is next.

  11. The caliper pin tool is pushing out the bolt.

    The caliper pin tool is pushing out the bolt.

  12. The caliper pin tool has a groove on the handle.

    The caliper pin tool has a groove on the handle.

  13. Caliper pin & piston tools.

    Caliper pin & piston tools.

  14. Horn & relay wiring schematic.

    Horn & relay wiring schematic.

  15. Small slap hammer pin & nail puller complete view.

    Small slap hammer pin & nail puller complete view.

    This slap hammer has a keyless chuck as a removable attachment. It could be used for pulling out nails from mouldings without leaving pry marks on the wood. Another use is for removing that subborn dowel pin on the bottom of a Ford transmission.
  16. Small slap hammer pin & nail break out view.

    Small slap hammer pin & nail break out view.

    This slap hammer has a keyless chuck as a removable attachment. It could be used for pulling out nails from mouldings without leaving pry marks on the wood. Another use is for removing that subborn dowel pin on the bottom of a Ford transmission.
  17. Complete pin and nail puller.

    Complete pin and nail puller.

    This slap hammer has a keyless chuck as a removable attachment. It could be used for pulling out nails from mouldings without leaving pry marks on the wood. Another use is for removing that subborn dowel pin on the bottom of a Ford transmission.
  18. Break out view of the pin and nail puller.

    Break out view of the pin and nail puller.

    This slap hammer has a keyless chuck as a removable attachment. It could be used for pulling out nails from mouldings without leaving pry marks on the wood. Another use is for removing that subborn dowel pin on the bottom of a Ford transmission.
  19. AODE/4R70W and E4OD transmission pin outs with manual position sensor.

    AODE/4R70W and E4OD transmission pin outs with manual position sensor.

  20. sleepy dog

    sleepy dog

    after a long day, its nice to be going home
Back
Top