plug | Page 2 | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

plug

  1. A4LD valve body with a brake adjusting tool behind the stuck end plug.

    A4LD valve body with a brake adjusting tool behind the stuck end plug.

    I put this tool in this place to prevent the drill bit from going too far into the bore when the drill bit goes through the end plug.
  2. A4LD valve body getting the stuck end plug drilled.

    A4LD valve body getting the stuck end plug drilled.

  3. A4LD valve body end plug with a hole drilled into it for a slap hammer.

    A4LD valve body end plug with a hole drilled into it for a slap hammer.

    This is the end plug from an A4LD which was stuck in the bore. I had to drill a hole in it to attach a slap hammer.
  4. The outside of the pan with the drain plug.

    The outside of the pan with the drain plug.

  5. The inside of the pan with the drain plug.

    The inside of the pan with the drain plug.

  6. Supplies for soldering a drain plug into a pan.

    Supplies for soldering a drain plug into a pan.

  7. A4LD pan without a drain plug.

    A4LD pan without a drain plug.

  8. Spark plug diagnostic chart.

    Spark plug diagnostic chart.

  9. light_bar_008_Small_

    light_bar_008_Small_

  10. Pass side plug access

    Pass side plug access

    Passenger side plug access with fender splash guard removed
Back
Top