shaft

I rebuilt my heads down to a blown head casket. Got it running and then thru a rod do to some one loosening a bolt. Now I want to re pair the bottom half. But can't find no videos or anything telling me how to remove the crank shaft. Or something telling me how to fix the rod blowing out

This has been a recurring issue for a while now. every so often the battery keeps sending power to everything after the engine is shut off as if the key were turned too far when powering down. I'd have to find the sweet spot that seems to get smaller and smaller each time I'd shut her down, and...

Hi guys, I have a 91 awd aerostar (in Washington if anyone interested) and am curious if the steering shaft can swap into my on ranger? My ranger has two U joints in its shaft one about half way up and another just inside the firewall that kicks to the left to steering wheel. (It has a custom...

I can't seem to find any help on my problem. Today I decided to test the 4wd drive out cause , winter is around the corner. While sitting still I push the 4hi and all the lights illuminated and herd clicking noise. As well as a clunking noise in the front end not sure where it was coming from...

Hello all, Currently working on the 1991 Explorer 5 speed 4x4 I am in the process of taking down the transmission and I am stuck. I have finally achieved taking the bolts out from the rear of the drive shaft and is able to free it from the rear. But I can not pull the drive shaft from the...

So i have a 97 x sport with a bw4411 (control trac) transfer case. I have searched every junk yard in gods creation and cant find a driveshaft to work. both the transfer case and differential have the same yoke. (see below) i need a driveshaft shorter than 24" (a regular x front DS is too long)...

good afternoon gentleman. Had to change my fuel pump this weekend and noticed a bad oil leak. It's definitely my rear gear oil in the rearend b/c i changed it like a month or two ago and it still looks clean. My question to you though, the way its leaking it looks like I did a good job...

Front drive shaft from 96 v8 AWD Explorer to be used on my 2001 Sport Trac since I have a 4" Superlift installed.