upper control arm

Hi, I have a very noticeable clunking when going over bumps on and off road on both sides of the vehicle. I just replaced both sway bar end links since the driver side one sounded like loose change every time I went over a bump. The clunking was there before I replaced the links, but I thought...

I'm looking to lift my 07' explorer, and after finding that the Rancho quicklifts are all but extinct I'm looking towards strut spacers. I'm looking for 2" front and 1" rear, but I can't seem to find that anywhere so it looks like I'll be probably getting 1.5" front and 1" rear if I can find...

I have a 2003 Explorer XLT on completely stock suspension and stock wheels. After doing a lot of reading, plenty of reports seemed to indicate a 265/70/17 would fit, or MAYBE run into minor rubbing on the fenderwell panels at full lock. Well, at about 1.5 turns of the steering wheel, my new...

I took my car to the dealership to get the transmission filter and fluid replaced. the service adviser said that I needed to get my left and right lower control arms and 2 ball joints replaced. about 320 dollars worth in parts from Napa Auto Parts. I went to got see my mechanic, Frank. He...

alright everyone. as someone whose been diggin around these forums, and other forums for lift information, tyre size i figured id combine everything ive found and put it all in one place. most of the threads have expired pictures but the information is there, which is what matters! right? the...

Has anyone replaced the 2pc upper arm with a 1pc? If you did, did you have to use a camber kit when you made the change? I have a kit for each side of mine for after I get my rebuilt lower control arms installed (in other words, not yet installed). I bought them as a precaution. Months ago I...

Looking for some BTF upper control arms that a fellow 3rd genner is selling or might sell. Help me out guys.

I have a 99 xlt that needs an upper right ball joint so I've decided to do both sides. My question is my truck has the one piece upper control arm, will the two piece replacement work for me? Thanks in advance for your input.

My upper ball joints are in need of replacement. I inspected the UCA's, and they are not the OEM UCA's, but I have no idea what brand they are. The only identification I have is a part number stamped in UCA - TRW040 - and another stamped in the ball joint itself - 344T043 - passenger side in...