valve | Page 2 | Ford Explorer Forums

  • Register Today It's free!

valve

  1. Valve covers.

    Valve covers.

  2. A4LD valve body with a slap hammer removing the stuck end plug.

    A4LD valve body with a slap hammer removing the stuck end plug.

  3. A4LD valve body with a screw in the stuck end plug.

    A4LD valve body with a screw in the stuck end plug.

  4. A4LD valve body with a brake adjusting tool behind the stuck end plug.

    A4LD valve body with a brake adjusting tool behind the stuck end plug.

    I put this tool in this place to prevent the drill bit from going too far into the bore when the drill bit goes through the end plug.
  5. A4LD valve body getting the stuck end plug drilled.

    A4LD valve body getting the stuck end plug drilled.

  6. A4LD valve body end plug with a hole drilled into it for a slap hammer.

    A4LD valve body end plug with a hole drilled into it for a slap hammer.

    This is the end plug from an A4LD which was stuck in the bore. I had to drill a hole in it to attach a slap hammer.
  7. Converted utility tub with a drain valve, and a water filter.

    Converted utility tub with a drain valve, and a water filter.

  8. Cleaned for new head gasket

    Cleaned for new head gasket

  9. Dirty before new head gasket

    Dirty before new head gasket

  10. IAC Valve after cleaning

    IAC Valve after cleaning

    IAC Valve underside after being cleaned. Allow to dry thoroughly!
  11. IAC Valve

    IAC Valve

    IAC Valve on engine before removal. Only need two bolts (10mm) to remove.
  12. IAC Valve removed

    IAC Valve removed

    IAC Valve removed
  13. IAC Intake connection

    IAC Intake connection

    IAC Intake connection
Back
Top