03 PCM swap to 04 PCM | Page 2 | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

03 PCM swap to 04 PCM

What is a Ford LCF?
 



Join the Elite Explorers for $20 each year.
Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.











Can-bus started in 2004. Your going to need a non can bus pcm for your 2003.
 






Can-bus started in 2004. Your going to need a non can bus pcm for your 2003.
I think your wrong, even the 02 Explorer cluster has small servo gauge motors interchangeable for all six gauges even the Speedometer and Tachometer.

When the batter is disconnected and reconnected the first time the key is turned on all gauges sweep to their highest reading (full gauge) and drop back to their resting point, and all of them have resting stops.

I work on a few clusters, and swapped a 98 Mustang Cluster into a 2000 Mercury Grand Marques, and will be putting it into a 03 Crown Vic and could do so with a 04. AS these were the years of the Mercury Marauder's which gauge cluster were backward comparable to 1996 Vic and Mercury's.

Custom Cluster lighting 009.JPG


This is my custom cluster in my 2000 Mercury.

Note only the speedo and tach have resting stops.

This cannot be done with Fords Crown Vic after 2004 as can bus happened it 2005 in Vic.

SO I believe Ford was running Canbus on the 02s up.

.
 






BoominXplorer is correct, like you I thought it was 05 for the change. Can bus is on the 04 explorer. Ford didn't switch all vehicles to Can bus in 04
 






Sorry my point was I believe they switched Explorers to Canbus from 02....

For Crown Vic it was 05.

Rich
 






Back
Top