drdoom
Explorer Addict
- Joined
- December 13, 2007
- Messages
- 4,582
- Reaction score
- 340
- City, State
- VA
- Year, Model & Trim Level
- 2005 Eddie Bauer 4.6L 4X4
I always have some short scraps of 1/2" PEX laying around, so I used a piece in lieu of a door anti-rattle kit. Just took a piece about four inches long and sized an inch or so down on the belt sander, cut it to fit, and no more rattling door. The reason I started with a longer length was so I would not have my fingers near the sanding belt. I tried a piece not sized down but it took a bit of force to open the door back up, and I didn't want to take a chance with those cheesy door handles. I'll see how it holds up.