1997-4.0SOHC P0204 Code problem | Ford Explorer Forums

  • Register Today It's free!

1997-4.0SOHC P0204 Code problem

marcus1

New Member
Joined
September 22, 2010
Messages
4
Reaction score
0
City, State
Rochester, NY
Year, Model & Trim Level
97 Explorer Sport
Hi;

I'm Marcus and I have owned Explorers for about 10 years now and love them.

Currently I own a 1997 2door sport model which currently has
194,000 miles on it.

Here's the problem:

I was driving on the highway today and heard a BOOM noise come
from the engine compartment. When I looked out the rear view mirror
I thought I noticed something bouncing in
the road behind me.

The car seemed to lose a little power and when I came to a stop
the engine was running rough and idling below normal.
The engine light did not come on and all gauges appeared as normal.
When I got home, I shut the engine off and tried to restart it.
The engine started but took about 5 secs instead of starting
immediately and then continued running very rough.
After searching the engine compartment and finding nothing
obvious, I tried restarting the now cold engine. It still started hard and now the Check Engine light was on.
I went to the parts store and had the code read.
The code was P0402 - EGR Flow Excessive.
I erased the code.
I got back in the car and it started normally and drove normally
all the way home (approx 7 miles).
Really not sure what happened, but I know this is surely not
the end of this story....

Has anyone ever experienced/heard this before and have any suggestions
or advice?

It would be greatly appreciated!

Marc
 






Sticking EGR Valve would be my guess, it became unstuck, closed, and the engine likes sucking in fresh air better than a large amount of exhaust gas coming in.......imp
 






Featured Content

Back
Top