2" lift kit question

[jayrome_22]

I have a stock 1994 XLT. I am wanting to install a 2" lift kit on it. The lift kit i am looking at purchasing only comes wiht front coils and rear leafs. Is this all that is needed??? Do i need to buy longer shocks??

 

[dreamr]

With a 2" lift your factory size shocks and brake lines as well as driveline will be adequate.

 

[Cypher]

Just out of interest, what lift kit are you looking at?

 

[Redrig]

You will also need an alignment, but as far as the parts to lift it, yes thats all you need.

 

[ExplorerSportNu]

Yup you won't need longer shocks with a 2" I'm assuming its the performance accessories bl kit?

 

[jayrome_22]

I was looking at the sky jacker 2" kit it seems reasonably priced. Thanks for the advice

 

[CodePoet]

you will need to get an alignment. If the kit doesn't come with new drop brackets for the front axle you'll need a new set of camber bushings...but the alignment shop will have those. I did an f-150 spacer/aal lift on mine and I beleive the alignment cost just around or above 100 bucks.

Good luck
cp

 

[bennyhana20]

I installed the 2" skyjacker. Definitely happy with my purchase.. Do the radius arm bushings the same time if you can. I just installed a couple months ago. Im about to buy some drop brackets. i don't think that my camber can be adjusted enough through an allignment. any thoughts? (i spoke to a dealership and they wondered why the hell i was putting larger springs on a split axle...) i also really don't want to mess with the ball joints.. Right now im only running 30" BFG AT but the truck is definitely capable and looks sharp..