2000 sport rockers

[sportblack99]

Its time to rip out what's left of my rocker panels. Found them in LMC for 39.95 a side. Anyone found lower prices? 40 a side isn't too bad to me though .

 

[sport97]

That is what I paid locally.

 

[BlkSquad]

It's the dogleg that I need that is nearly impossible to find.

 

[sportblack99]

Yea the dogleg isn't available. Gonna keep an eye out at my local pick-a-part for a rust free one. Or make my own.

 

[sport97]

I made my doglegs with galvanized sheet metal cut up and bent then rivited in place and bondo. Came out great. I also had to build new inner rockers because the aftermarket rockers are just the outer rockers.

 

[sportblack99]

I made my doglegs with galvanized sheet metal cut up and bent then rivited in place and bondo. Came out great. I also had to build new inner rockers because the aftermarket rockers are just the outer rockers.

Got a how to thread? I've seen the 4 door one.

 

[sport97]

No how to but I have pics so you can see how I cut/bent the metal.

No pics of the inner rocker but its just a flat piece of galvanized on the back side.

http://www.explorerforum.com/forums/showthread.php?t=342936

 

[vroomzoomboom]

i just cut a set of rockers off a 4 door, shorten them, and re welded them together

 

[sportblack99]

If I can find a rust free or relatively rust free ones ill just cut them off but easier said than done in NE indiana

 

[vroomzoomboom]

try finding them in manitoba, canada. you'll know it when you see it. the unicorn will be guarding them

 

[sportblack99]

Yea Kentucky and north you're basically SOL