2005 Mountaineer v6 AWD Front Axle Torque?

[rrack]

Fixing to replace the front lower ball joints and I'll need to remove the front axles. What is the torque specs when I replace them? I've seen guesses of around 185? Actually while I'm at it, what is the torque for the lower ball joints as well?

Thanks much,
Robert

 

[EXPLORER04]

1 Axle-to-wheel hub nut (4x4 only)
2 Speed sensor harness (part of 2C204)
3 Brake hose-to-wheel knuckle bolt
4 Anchor plate bolt (2 required)
5 Brake caliper, pads and anchor plate
6 Brake disc
7 Wheel hub-to-wheel knuckle bolt (3 required)
8 Wheel bearing and hub assembly
9 Cotter pins
10 Tie-rod end-to-wheel knuckle nut
11 Lower ball joint-to-wheel knuckle nut
12 Upper ball joint-to-wheel knuckle nut
13 Wheel knuckle

 

[rrack]

Awesome! Thanks much! I can't find a definitive answer... What size is the OEM nut? 32mm 34 mm? I tried a 1 1/4... Too big... 1 1/8 too small... I'm guessing 30mm? Have tons o sockets... Just none that large,..

 

[EXPLORER04]

30Mm

 

[X-LION]

Thank you, Explorer04!!!