2005 sport trac front rotors

[hondaslave1342]

I have a 2wd drive ST and I need to change the front rotors. I've done some research and I'm confused. Is it different from 2wd & 4wd? Do I need to change wheel bearings? I've never changed a rotor so please any insight is greatly appreciated. My research has lead me to purchase Warner disks for Rock Auto.
#1 How to I tighten hub nut? By feel?
#2 If I need to change bearing is there a seal to purchase also?
#3 As far as gease I have Lucas red n tacky 540° drop point. Is this sufficient?
THANKS A BILLION

 

[kmartin]

Isn't the bearing with the rotor for the 2wd?

 

[hondaslave1342]

Isn't the bearing with the rotor for the 2wd?

 

[hondaslave1342]

Isn't the bearing with the rotor for the 2wd?

That's what I'm thinking..just trying to get insight before starting. Thanks for the reply

 

[hondaslave1342]

Do I need to buy seals and wheel bearings along with the rotors? Just trying to get a parts list so I don't forget something. Thanks

 

[N2FORD]

Seals yes, might be able to reuse your bearing but it would be best to get new. The bearing races should be in the rotor. Watch some videos on how to pack the bearings and how hard to tighten the nut.