2007 Ford ranger 4.0L 4 x 4

[Highland motors]

Stuck in 4x4 low.
Not Transfer case module.
No codes.
Scanner showing switch operation O.K.
Check rfelated wring. O.K.

 

[Rick]

I'm pretty sure your Ranger uses an electric shift 13-54 transfer case. If that's the case you can remove the shift motor and turn the shaft with a pair of vise grips. That will at least get you back in 2wd, or whatever range you need.

Use the Google search box near the top of every page to search for "stuck 4 low" or "stuck four low" there are several threads on the subject.

Welcome to the forum and best of luck fixing the problem