32" Super swampers fitment + rims questions

[brs256]

Please don't flame me for not reading the stickeys .. I did thoroughly.... my question is should I be able to fit 32v11.50 super swamper tsl's with a two inch lift(spacer/shackle) ? I doNT have a problem going to town with a sawzall im just lookingg for a ball park estimate of what it will require ... also I'm getting these tires Brandnew for $550 only downside Is I have to find new rims because these are 16"

I'm wondering what size RIM.... back spacing and width would b ideal???

 

[Palmer7]

yes you will be able to fit them with slim to none on the trimming. you should get some 16x8 with 3-5 in backspacing depending on how you want it to look.

check this out!
http://www.explorerforum.com/forums/showthread.php?t=67200

 

[brs256]

yes you will be able to fit them with slim to none on the trimming. you should get some 16x8 with 3-5 in backspacing depending on how you want it to look.

check this out!
http://www.explorerforum.com/forums/showthread.php?t=67200

I dont care how it looks .. just Ned to know what to shop for on craigslist lol

 

[LoganD]

not to thread jack but where'd you get the tires?

 

[brs256]

craigslist ... near wellington ... brandnew with stickers $500 less than half off retail

any idea where i can find a set of rims ? 5x4.5 ideally 8" wide with 2-3" of backspacing ... for $200 or less ... possibly 250 if they are in really good condition/look cool

 

[brs256]

craigslist ... near wellington ... brandnew with stickers $500 less than half off retail

any idea where i can find a set of rims ? 5x4.5 ideally 8" wide with 2-3" of backspacing ... for $200 or less ... possibly 250 if they are in really good condition/look cool

i noticed u were in ohio ... i was the member of a probe forumn .... and one time i was talking about a good deal i was about pick up off of craigslist when another forumn member beat me there....lol thats y i waited untill they were on my trailer before i answered ur question of where i was getting them lol

 

[alakers]

search for a second or third gen ... because they are 16's. get some cragar soft 8's, if you shop hard enough for them you can pry have them shipped to your door in i'd say under 260. pics when they're done !!!!

 

[LoganD]

You know, I always hear about people getting insane deals like that on Craigslist, but I haven't found anything near to being that good of a deal. Post some pictures of them on your truck!

 

[brs256]

search for a second or third gen ... because they are 16's. get some cragar soft 8's, if you shop hard enough for them you can pry have them shipped to your door in i'd say under 260. pics when they're done !!!!

I doubt third gen rims would work ... cause my first gen has the hubs that stick out ... and all the second gens ive seen have had 15"

 

[brs256]

They are on ..Tbanks for the help everybody .... went with cragar v5's 16x8's

I'm gonna start a build thread soon

 

[alakers]

dammit man post some pics !!! dont keep us in suspense !!!