32x10.5 on stock wheels with body lift

[rock883]

Will the 15x7 inch rims hold a 10.5 inch wide tire? Also I can fit those 32's with abosy lift can't I? Or can I get 33's? I would like to get 33's but I need to get something fairly skinny cause I can't afford to get new rims, can 12.5's fit on stock 15x7's? Also, I want to get Super Swamper Radial TSL's and the description for them says they are quiet since they are radials, I don't want them extremely loud, but I want radials and I like the look of them and the price for the 32x10.5 (like $114 or somethin I think) THANKS

 

[Ken Cooke]

With a body lift, 32's should clear your fenders. The 33 inch Super Swamper is a tall tire. I tried to run a 33"TSL-SSR with 10" wide rims, and the tires completely filled the fender zone of my Ford Ranger. That's with a 2" body lift and a 2.5" Rancho suspension lift. I now have the 32x11.5x15 TSL-SX's, and they fit just fine.
Are you going with a 3" body lift? This would give you the most clearance, and could possibly clear 33's. Spend an extra $120 and get some white spoke rims (15x8) or find a set used. This could hold you over until you could afford a set of Weld rims - 32's.

- Ken
--------------
'94 Ford Ranger
4X4

 

[A91EBexplorer4x4]

Rock883,
Yes 10.5's will fit the stock 15x7" rims. and 32's will clear fine i think. 33's maybe some brands. i have a 3" body lift and 31x10.50's and i have no rubbing or anything. i have a 91EB, you didnt specify what you have. i think 10x50's are the widest you can get on the 7" rim (safely).
if i was going to do it all over again id go with some cheap black spoke rims and then get some 32's or a small 33.
Later

------------------
1991 Eddie Bauer 4x4
K&N drop in filter, Modified air box.
3" lift 31x10.50's
Dunlop R/V's.
Sway bar quick disconects disc.http://www.freeyellow.com/members8/91fordexplorer/index.html

 

[rock883]

I have a 91 4dr. I will probably end up going with the 32's because then it won't look so wierd with the whole fender well filled. I am getting a 3" body lift. I know that 4wheelparts.com has some cheap, but cool looking rims. They are exactly like the stock ones with the holes in them:
Dead Link Removed
the 15x8's are $51.65 and the 15x10's are $63.75, but if I can put the 10.50's on the stock rims, I'll just keep the stock rims.

Thanks for the help.