Aussie Explorer
Well-Known Member
- Joined
- June 3, 2005
- Messages
- 400
- Reaction score
- 2
- City, State
- Western Australia
- Year, Model & Trim Level
- 98 XLT
Today the 4*4Hi and Low Light’s started blinking at me, and I was unable to engage 4*4Hi or low. :thumbdwn:
The 4WD light’s flash at a rate of 6 Blink’s every 2 minutes. I.E The light’s Blink 6Times then after 2 minutes they blink another 6 times. It did it for the whole 4hour trip home.
The last time I used 4WD was 3 day’s ago and both Hi and Low range worked perfectly, then this morning when I started the car the 4WD light’s started blinking at me and I couldn’t engage 4WD which put a end to the day’s 4WDing for me.
It’s a 98XLT 4WD 4.0Ltr V6 SOHC 130,000k’s (82,000 miles) anyone know what has happened (Dose this Blinking light sequence indicate anything specific)?? Where should I start looking??
I will check the fuses first thing tomorrow, as I have only just got home and it’s dark and I am a bit tired.
The “TOD” System is still operating thou.
The 4WD light’s flash at a rate of 6 Blink’s every 2 minutes. I.E The light’s Blink 6Times then after 2 minutes they blink another 6 times. It did it for the whole 4hour trip home.
The last time I used 4WD was 3 day’s ago and both Hi and Low range worked perfectly, then this morning when I started the car the 4WD light’s started blinking at me and I couldn’t engage 4WD which put a end to the day’s 4WDing for me.
It’s a 98XLT 4WD 4.0Ltr V6 SOHC 130,000k’s (82,000 miles) anyone know what has happened (Dose this Blinking light sequence indicate anything specific)?? Where should I start looking??
I will check the fuses first thing tomorrow, as I have only just got home and it’s dark and I am a bit tired.
The “TOD” System is still operating thou.