4WD Low - Switching Hard.

[maxjivi05]

I'm having a hard time getting to and from 4WD Low. I have no problem getting into 2 WD and 4 WD Auto, but getting 4WD Low on and then getting it Off is hard I have to fiddle around with the Park, Drive, Gas, Brake till it finally kicks in, I'm sure something is having a hard time moving and needs greased or something.. If anyone could shed some light on this I would greatly appreciate it.

 

[96eb96]

I'm having a hard time getting to and from 4WD Low. I have no problem getting into 2 WD and 4 WD Auto, but getting 4WD Low on and then getting it Off is hard I have to fiddle around with the Park, Drive, Gas, Brake till it finally kicks in, I'm sure something is having a hard time moving and needs greased or something.. If anyone could shed some light on this I would greatly appreciate it.

Well, normally, the truck has to be in neutral with your foot on the brake to make the shift in or out of 4wd LOW.

 

[gijoecam]

Indeed, your vehicle must be less than 3 mph (stopped is better), transmission in neutral (or clutch disengaged for a manual trans), with your foot on the brakes, then flip the switch. Do the same to get out of 4low.

-Joe

 

[maxjivi05]

Worked like a charm... Thank you!