MARTY196
Well-Known Member
- Joined
- March 4, 2002
- Messages
- 290
- Reaction score
- 0
- City, State
- Albuquerque,New Mexico
- Year, Model & Trim Level
- 1992 XLT
1992 4x4 XLT 4.0L pushpod engine, automatic locking hubs. push the 4x4 button on the dash
to engage 4x4 high, light goes on 4x4 indicator on dash lights up. put all 4 wheels on jack stands
transfer case engages turns front driveshaft which in turn turns the 2 drive axles going to front wheels but wheels don't lock into 4x4. also checked the teeth on the drive shaft all are okay so driveshaft is turning but not wheels also when I push 4x4 low button nothing happends assuming this has to do with 4x4 hi not working any help greatly appreciated thanks
to engage 4x4 high, light goes on 4x4 indicator on dash lights up. put all 4 wheels on jack stands
transfer case engages turns front driveshaft which in turn turns the 2 drive axles going to front wheels but wheels don't lock into 4x4. also checked the teeth on the drive shaft all are okay so driveshaft is turning but not wheels also when I push 4x4 low button nothing happends assuming this has to do with 4x4 hi not working any help greatly appreciated thanks