k4e2n01234
Member
- Joined
- February 20, 2009
- Messages
- 23
- Reaction score
- 0
- City, State
- Ventura, California
- Year, Model & Trim Level
- 92 xlt 5spd man. auto 4x4
So I have a 92 xlt 5 spd manuel trans with automatic 4x4.The 4x4 button doesnt work no light no engageing of anything so as far as i can tell the motor doesnt work but im not exactly sure. I went under to the TC and took off the shift motor and looked at it nothing seemed wrong with the motor itself but the yellow wire that is connected to it is not completely cut but is sort of pinched looking in about 3 places still attached though. also when i put the motor back in i turned it until it engaged the 4x4 and the light on the dash came on telling me the 4x4 was on and then i pushed the button and i guess the computer sensed that maybe it had traveled to far and readjusted everything back to normal. but what is weird is that the button again does nothing. i pushed it and i heard clicking in the back where the computer is but nothing from underneath at the TC so I dont know is it the wire the motor or something else?