Agis8
Member
- Joined
- August 24, 2015
- Messages
- 11
- Reaction score
- 0
- City, State
- Chicago
- Year, Model & Trim Level
- 2000 Explorer 4-Dr SOHC
Adjusting 4x4 control knob, can hear clunk when TC shifts into/out of Low, but when set to High 4x4, it does not engage. Dash light indicates 4x4 High, no light flashing going on. Any ideas? Also, earlier, had front wheels off ground, engine running, in Park, put into 4x4 High and I can turn the front drive shaft by hand, both wheels rotate the same direction. No TC locking in High mode? 4x4 Low definitely works as confirmed by driving and turning at steering wheel lock. TCCM problem likely? Thanks for any help offered.