94 Ranger dealer installed keyless entry

[Shoecobbler]

:rangergreen:
I own a 94 Ranger and have had it since 96. Have never had but one key fob so went to E-bay and found two nos two button fobs identical to original . For some time now door locks activate up and down each time truck is started
The key less entry module was dealer installed and I have also found a nos module on E-bay , p/n F3AZ-19A361-K. Even with new module locks still activate several times . I CAN FIND NO PLUG ANYWHERE IN THIS TRUCK NEEDED TO PROGRAM THESE NEW FOBS. I am at a loss trying to program these new key fobs. Any advise would be appreciated.There is a small button on bottom of dash [ dealer installed ]. This button has to be depressed in order to start the truck. IS THIS NORMAL ???

 

[Wolfie_85]

To me, it sounds like it's stuck in programming mode. That is, when you sync a fob with the system. Not knowing if this is a Ford OEM system, or an aftermarket one, I can't be real sure. To say the least, if you haven't intentionally put it in in that mode, it could be malfunctioning. Ususually, it's pretty difficult to "accidentally" put these things in programming mode, as it's a risk to your vehicle's sucurity, allowing unauthorized entry.