J.Rovirosa
Member
- Joined
- November 13, 2009
- Messages
- 47
- Reaction score
- 2
- City, State
- Socal
- Year, Model & Trim Level
- 1995 & 2003 Limiteds
I think the valve cover rails on my heads might be cracked, since I'm getting a very slow leak that tends to pool on the bottom rearmost exhaust manifold bolt head. Valve cover gaskets are brand new OEM and I'm positive it's not leaking from there or the lower intake. Looking at patching with JBWELD temporarily, but will ultimately replace the heads.
Haven't heard back from EQ to see if they still make the 95tm heads, but in the event that they don't, does anyone see any problem with getting the late-style small chamber/small exhaust port heads and just porting and polishing the exhaust side to roughly the same size as that on the 95tm heads? Truck is stock as can be and just looking for it to run exactly and as reliably as it did from the factory.
Haven't heard back from EQ to see if they still make the 95tm heads, but in the event that they don't, does anyone see any problem with getting the late-style small chamber/small exhaust port heads and just porting and polishing the exhaust side to roughly the same size as that on the 95tm heads? Truck is stock as can be and just looking for it to run exactly and as reliably as it did from the factory.